EN 10025-6 S550QL 1.8926 high strength quenched and tempered

Gangsteel supply EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel . thickness 3mm to 180mm.Heat treatment of S550QL steel : Quenching and tempering (Q+T) S550QL is a European standard special alloy structural steel, attributed to quenched and tempered high yield strength structural steel, S indicates structural steel, 550 is the yield value, unit MPa, Q indicates delivery
Conditions, L indicates that the temperature is not lower than -50��, the specified smaller value of impact energy, S550QL steel is a trademark in the EN 10025-6 specification, this specification rules that the smaller nominal thickness of the steel is 3mm, and the larger nominal thickness ≤

S235JR is a kind of non-alloy metal, intended to be used for structural purposes. This explicit metal grade ic categorised in Part 2 of the Euronorm specification EN 10025.

Falls Twp. Holding Special Meeting On Proposed US Steel Site Redevelopment – LevittownNow.com

Falls Twp. Holding Special Meeting On Proposed US Steel Site Redevelopment.

Posted: Mon, 30 Nov 2020 17:33:56 GMT [source]

DINESH METAL INDUSTRIES is a proactive organisation engaged in supplying of high quality products that meet and exceed clients’ particular necessities and thus ensure full satisfaction. Tensile energy is the crucial value of transition from uniform plastic deformation to regionally concentrated plastic deformation. It is also the utmost load-carrying capacity of ONORM S 500 Q ÖNORM EN under static rigidity. Tensile strength is the resistance that characterizes the maximum uniform plastic deformation of ONORM S 500 Q ÖNORM EN . The deformation of tensile specimens is uniform earlier than they bear the utmost tensile stress, but past that, the ONORM S 500 Q ÖNORM EN begins to neck, i.e. concentrate deformation.

steeldrivers EN10025-6 1.8924 steel plate

Katalor Enterprise give attention to carbon metal, alloy metal, stainless steel, part metal manufacturing and processing. Our products cowl a variety of purposes including the construction trade, shipbuilding trade, stress vessels and boilers, oil and gasoline, bridge construction, offshore platforms, stamping and chilly forming, automobile manufacturing, machinery manufacturing and energy plants. Our cooperation clients are in the Americas, Europe, Africa, Southeast Asia and the Middle East and different countries and regions. Unitedsteel Mill Supply High strength metal plate, and have varied inventory size, If you require high power metal plate. Unitedsteel Mill Supply High power metal plate, and have numerous stock measurement, when you require excessive energy steel plate, please contact us by way of Email to contact us. Acknowledgements The creator gratefully acknowledges the assistance of Michael Ling, P.Eng.

One individual could not have produced this handbook and the accompanying e-e-book. These acknowledgments can not adequately specific the authors honest appreciation and gratitude for everyones help. The standard contains cast steels for use generally engineering including equipment , automotive, armament , agriculture etc. Steels supplied to this normal are appropriate for hardening and in the quenched and tempered situation have good toughness at a given tensile strength.

  • ASTM A283 plate steel features low and intermediate tensile energy carbon steel plate of structural quality.
  • Our service includes all kinds of metal product , including raw materials and processed finished merchandise.
  • As a metallurgical engineer and long time user of steel requirements, creator of the four CASTI Metals Data Books, and member of ASTM A01 and B02 standard committees, I knew all too nicely the many pitfalls and challenges of writing such a handbook.
  • Comparing steel requirements is not a precise science, so the biggest challenge of getting ready such a e-book was deciding on the “rules of comparison.” Of the similar books on the market right now, none explain in detail why one steel is comparable to another.
  • Preface This is the book I never wished to put in writing, however always wished to personal.
  • There were many metal requirements from around the world that were new to me, which created far too many surprises and delays in finishing this book.

Kobelco Steel & Alloys is a Leading Manufacturer, intensive Stockholder of piping products for the Oil, Gas, Petrochemical and Nuclear Industries. Kobelco Steel & Alloys is the Manufacturer of Butt-weld Fittings, Forged Fittings, Compression Fittings, Outlets, Flanges & Long Radius Bends in Materials like Stainless Steel, Carbon Steel, Alloy Steel, Duplex & Super Duplex Steel, Nickel Alloys etc. We additionally manufacture and supply non-commonplace objects in any material to buyer’s specs.

high yield strength stainless steel EN10025-6 S550Q 1.8924 steel plate

Plate is used in truck frames, brackets, crane booms, rail vehicles and other compa rable applications. High strength weathering metal has been used in bridge engineering.It may also be used within the flooring board,containers, energy plant chimneys, railway engineering and other out of doors metal, similar to large outdoor sculpture steel. Metals Depot stocks lots of of sizes of metal angle you could purchase on-line in able to ship precut or mill lengths or you’ll be able to order simply what you want custom Cut to Size in small or massive quantity at wholesale costs. COMPARISON OF ASME SPECIFICATIONS AND … ASME SA-370 specification is similar with ASTM A 370. For willpower EN S890Q supplier of yield power, ASME SA-370 specifies a pressure value within the decreased section no more than 0.001 in./in./sec.

steelprice EN10025-6 S550Q 1.8924 steel plate


What is different in EN10025-6 S550Q S550QL and S550QL1?

S550Q, S550QL, S550QL1 are European standard quenched and tempered high-strength structural steel plates.
S550Q, S550QL, S550QL1 organize production and implement European standard EN10025-6.
S550Q, S550QL, and S550QL1 conform to EN10029 standard for appearance quality deviation.
The main difference between S500, QS550QL and S550QL1 is low temperature impact toughness: Q means -20℃ impact; QL means -40℃ impact; QL1 means -50℃.

What is EN10025-6 S550QL Carbon Equivalent: CEV?

Thickness, mm

Max CEV based on the ladle analysis







What is EN 10025-6 QT steel plate referring standard?
EN 1011-2 Welding-Recommendations for welding of metallic materials-Part 2: Recommendations for arc welding of ferritic steels
EN 10020: 2000 definition and classification of steel grades
EN 10025-1: 2004 Hot-rolled structural steel products-Part 1: General technical delivery conditions
EN 10027-1 Steel naming system-Part 1: Steel names and symbols
EN 10027-2 Steel naming system-Part 2: Steel number
EN 10163-1 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 1: General requirements.
EN 10163-2 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 2: Plates and wide flat products
EN 10164 Steel products with through-thickness performance-Technical delivery conditions


EN10025-6 S550QL Mechanical Properties



Yield Strength

Tensile Strength


Charpy V Notch Impact Test


Min Value



Min Mpa


Min %
















Note: Impact energy for impact test is on longitudinal

EN10025-6 S550QL Chemical Composition


The Element Max (%)






























and never lower than 0.1 occasions the maximum charge when the stress exceeds one half of the required yield level or yield power. API 5L X65 PSL1 Pipe is a excessive yield seamless pipe that’s modified to suit offshore structural purposes. It is intended to be used in fastened offshore structures and is designed to function in the offshore sector. tough set up situations or when a low displacement pile is needed.

Contact Us
Email: admin@gangsteel.com
Phone: whatsapp: 0086-13598879167

Gangsteel produce EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate
, ,

steel sale cheap EN10025-6 S550Q 1.8924 steel plate

There were too many events after I thought the guide was completed, solely to have to alter, add, or delete a rule which made yet one more evaluate of the guide needed. After more than two years of researching metal requirements and gathering data from around the world for the 2nd and 3rd editions of this handbook, then growing a comparability order to greater than 100,000 pieces of data, this handbook is an ongoing and increasing project. The addition of a totally searchable e-e-book on CD-ROM makes this product much more useful, since looking for one piece of knowledge in more than 100,000 is not an easy task. The e-book makes trying to find a comparable steel a fast and easy process. In some instances, the person might discover out that the steel is non-comparable. Tie a chain to it and anchor it to your desk, as a result of once others see it, they’ll want to use your copy.

steel america EN10025-6 S550Q 1.8924 steel plate

Yield strength is the yield limit of ONORM S 500 Q ÖNORM EN when yielding occurs, that’s, the stress resisting micro-plastic deformation. The external pressure larger than the yield strength will make the ONORM S 500 Q ÖNORM EN components permanent failure and unable to get well. Less than this, the ONORM S 500 Q ÖNORM EN elements will return to their unique form. 09CuPCrNi-A is a climate resistant steel created by alloying copper, chromium and nickel. 16Mo3 Steel is a EN10028 specified pressure vessel grade chrome molybdenum steel alloy is used as a weldable metal in the fabrication of business boilers and steel pressurised vessels discovered within the oil. The regular cut-off point for decent rolled products is around 1.5mm thick. The standard applies to castings joined by weld only when the welding is finished at the foundry and not when the castings are welded to wrought steels.

Sights and Sounds of a Steel-High Championship Celebration – FOX43.com

Sights and Sounds of a Steel-High Championship Celebration.

Posted: Mon, 30 Nov 2020 05:21:00 GMT [source]

EN metal grade specification is a excessive yield energy structural steels within the quenched and tempered situation steel plate grade in S460Q, S460QL, S460QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade. These requirements relate to the delivery situations for alloy and non-alloy steels equipped in cold rolled strips of as much as 600mm width for warmth remedy The metal names in these standards are allotted in accordance with BS EN and CR and the steel numbers are allotted in accordance with BS EN . The steels laid out in part 2 and 3 of this standard are relevant to scorching rolled flat merchandise within the vary 1,5mm to 20mm for steels with ReH 2 and steels 1,5mm to 16mm for steels with minimal yield strength. This a part of EN gives the properties and different supply conditions for flat merchandise for basic functions, i.e. not for strain vessels nor for aerospace or other specialised functions, corresponding to springs, It is used for ordering purposes. Quenching operation which consists of cooling a ferrous steel plate extra quickly than in nonetheless air.Tempering warmth treatment utilized to a ferrous metal plate usually after quench hardening or other warmth remedy to convey the properties to the required stage. High yield strength steel plate S500Q underneath EN owned the minimum yield energy at 500 Mpa and tensile energy within Mpa.

Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.