EN 10025-6 S550QL 1.8926 high strength price

Gangsteel supply EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel . thickness 3mm to 180mm.Heat treatment of S550QL steel : Quenching and tempering (Q+T) S550QL is a European standard special alloy structural steel, attributed to quenched and tempered high yield strength structural steel, S indicates structural steel, 550 is the yield value, unit MPa, Q indicates delivery
Conditions, L indicates that the temperature is not lower than -50��, the specified smaller value of impact energy, S550QL steel is a trademark in the EN 10025-6 specification, this specification rules that the smaller nominal thickness of the steel is 3mm, and the larger nominal thickness ≤

The metal numbers consist of 1 followed by a point and 4 figures. As an example the steel numbers of the above-talked about steels are 1,8836 and 1,4307. The steel numbers are allocated by a European Registering Office.

Depending on the thickness of the product and the manufacturing conditions, the producer could add to the steel one or a number of alloying components as much as the utmost values given in order to obtain the desired properties. These are merchandise of various cross part shapes that are obtained after descaling, by drawing of scorching bar or rod on a draw bench. This operation offers the product particular options with respect to shape, dimensional accuracy and surface end.

Contact Us
Email: admin@gangsteel.com
Phone: whatsapp: 0086-13598879167

Gangsteel produce EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate
, ,

These requirements relate to the delivery circumstances for alloy and non-alloy steels supplied in cold rolled strips of up to 600mm width for warmth treatment The steel names in these standards are allocated in accordance with BS EN and CR and the steel numbers are allotted in accordance with BS EN . This a part of EN offers the properties and other delivery conditions for flat products for general purposes, i.e. not for pressure vessels nor for aerospace or different specialised purposes, corresponding to springs, It is used for ordering purposes.

Gangsteel is specialized in super thick low alloy, excessive power steel plate and cooperated with ABS, BV, DNV, CCS, GL, LR, KR, NK, and RINA Classification Society to approve the tremendous thickness plate to 300mm now. The regular minimize-off point for hot rolled products is round 1.5mm thick. BS EN Stainless Steels -Part three Technical supply situations for semi-finished merchandise, bars, rods and sections for basic functions.

It is usually used for elements requiring cold forming, much like crimping, swaging or bending. It can also be used for Shafts, tools elements, bolts, pinions, gears, as well as within the creation of furniture, house tools and different shopper items. The normal includes forged steels for use generally engineering including equipment , automotive, armament , agriculture etc.

Quality Steel Corporation Expands Fremont, Ohio Manufacturing Plant – Area Development

Quality Steel Corporation Expands Fremont, Ohio Manufacturing Plant.

Posted: Mon, 30 Nov 2020 13:50:39 GMT [source]

www alabama steel com EN10025-6 1.8924 steel plate

Tensile power is the resistance that characterizes the maximum uniform plastic deformation of ONORM S 500 Q ÖNORM EN . The deformation of tensile specimens is uniform before they bear the maximum tensile stress, but past that, the ONORM S 500 Q ÖNORM EN begins to neck, i.e. concentrate deformation. If you could have any inquiry in metal value or technical conditions, please contact us freely. though greater strength grades and weathering grades could be provided. Nickel – Monel® – Inconel® – Incoloy® – Hastelloy® – Alloy 20 – Duplex Trademark Notice -Some names are commerce names and/or emblems of particular manufacturers. Ashtapad Overseas, Mumbai, India isn’t affiliated with any manufacturer. Orders will be stuffed to meet specifications from any obtainable supply.

  • In truth, the ratio of power to weight for metal is the lowest than any other constructing materials available to us.
  • Steel, as everyone knows, presents nice strength though it is mild in weight.
  • Cold Rolled metal has an improved surface end and tighter tolerances compared to scorching rolled metallic.
  • Each chapter describesthe manufacture, salient properties and typical uses ofthe varied supplies, with the aim of creating sure theirappropriate utility inside awareness of their eco-logical affect.

steeldrivers nashville EN10025-6 S550Q 1.8924 steel plate

Katalor Enterprise concentrate on carbon steel, alloy steel, chrome steel, part steel manufacturing and processing. Our products cover a variety of functions including the development business, shipbuilding trade, stress vessels and boilers, oil and fuel, bridge construction, offshore platforms, stamping and cold forming, automobile manufacturing, machinery manufacturing and power vegetation. Our cooperation prospects are in the Americas, Europe, Africa, Southeast Asia and the Middle East and different countries and regions.

Tensile power is the critical value of transition from uniform plastic deformation to locally concentrated plastic deformation. It can also be the utmost load-carrying capacity of ONORM S 500 Q ÖNORM EN under static rigidity.

Mammoth shredder feeds Valley steel mi ll

The suitability of en structural metal pipe includes functions similar to bolted connections, welding, in addition to riveting. Since non-alloy S235JR is easily weldable and bendable, the material works out to be properly suited for use in non-critical structures. The machinability traits of the EN Steel Pipe materials is similar to that of mild steel grades. Typically S235JR pipes beneath this specification can be used in structural functions such as automobile buildings, the construction of buildings and bridges, and instruments and cutters as well as for some parts in shipbuilding. The EN specification refers to a set of European requirements which cover structural steels along with specifying their technical delivery circumstances as well. The minimal content of 0.015% applies to soluble aluminium,this worth is regarded as attained if the whole aluminium content material is a minimum of 0.018%; in case of dispute the soluble aluminium content material shall be determined New opportunities for buyers! Post free purchasing for requirement of steel S550Q (1.8904) Mechanical properties of steel S550Q (1.8904)Reviews 2COMP Cams Hi-Tech Pushrods Free Shipping on Feb 28,2016 s550q materials#0183;Find COMP Cams Hi-Tech Pushrods and get Free Shipping on Orders Over $ninety 9 at Summit Racing!

rolled steel EN10025-6 S550Q 1.8924 steel plate

These requirements are the most recent European requirements for structural metal. The bodily properties of ONORM S 500 Q ÖNORM EN include excessive power, low weight, durability, ductility and resistance to corrosion.

stainlee steel EN10025-6 S550Q 1.8924 steel plate


What is different in EN10025-6 S550Q S550QL and S550QL1?

S550Q, S550QL, S550QL1 are European standard quenched and tempered high-strength structural steel plates.
S550Q, S550QL, S550QL1 organize production and implement European standard EN10025-6.
S550Q, S550QL, and S550QL1 conform to EN10029 standard for appearance quality deviation.
The main difference between S500, QS550QL and S550QL1 is low temperature impact toughness: Q means -20℃ impact; QL means -40℃ impact; QL1 means -50℃.

What is EN10025-6 S550QL Carbon Equivalent: CEV?

Thickness, mm

Max CEV based on the ladle analysis







What is EN 10025-6 QT steel plate referring standard?
EN 1011-2 Welding-Recommendations for welding of metallic materials-Part 2: Recommendations for arc welding of ferritic steels
EN 10020: 2000 definition and classification of steel grades
EN 10025-1: 2004 Hot-rolled structural steel products-Part 1: General technical delivery conditions
EN 10027-1 Steel naming system-Part 1: Steel names and symbols
EN 10027-2 Steel naming system-Part 2: Steel number
EN 10163-1 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 1: General requirements.
EN 10163-2 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 2: Plates and wide flat products
EN 10164 Steel products with through-thickness performance-Technical delivery conditions


EN10025-6 S550QL Mechanical Properties



Yield Strength

Tensile Strength


Charpy V Notch Impact Test


Min Value



Min Mpa


Min %
















Note: Impact energy for impact test is on longitudinal

EN10025-6 S550QL Chemical Composition


The Element Max (%)






























If you could have questions over the uses of S355 metal plate, or wish to speak with a Leeco consultant a few quote, please contact us. Yield strength is the yield restrict of ONORM S 500 Q ÖNORM EN when yielding occurs, that’s, the stress resisting micro-plastic deformation. The exterior force higher than the yield power will make the ONORM S 500 Q ÖNORM EN elements permanent failure and unable to get well. Less than this, the ONORM S 500 Q ÖNORM EN parts will return to their unique shape. Metals Depot stocks a lot of of sizes of steel angle that you could purchase on-line in able to ship precut or mill lengths or you possibly can order just what you need custom Cut to Size in small or giant quantity at wholesale costs. COMPARISON OF ASME SPECIFICATIONS AND … ASME SA-370 specification is similar with ASTM A 370. For willpower EN S890Q provider of yield power, ASME SA-370 specifies a strain worth in the decreased part not more than 0.001 in./in./sec.

Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.