Gb-t Wear chrome Chart


We produce and export GB/T 24186 NM400 Abrasion resistant steel plate, GB/T 24186 NM400 Wear resistant steel plate, GB/T 24186 NM 400 Cutting steel plate, NM 400 machined parts.NM400 Stocklist in 3-5days base on China warehouse and factory.
NM400 Abrasion resistant steel chemical composition max: C 0.25% Si 0.70% Mn 1.6% P 0.025% S 0.010% Cr 1.4% Mo 0.5% Ni 1% B 0.04%. Mechanical Property: HB 360-430 The physical performance of the steel plate is about 1000MPa, and the tensile strength is about 1100MPa.

We produce and export GB/T 24186 NM400 Abrasion resistant steel plate, GB/T 24186 NM400 Wear resistant steel plate, GB/T 24186 NM 400 Cutting steel plate, NM 400 machined parts.NM400 Stocklist in 3-5days base on China warehouse and factory.
NM400 Abrasion resistant steel chemical composition max: C 0.25% Si 0.70% Mn 1.6% P 0.025% S 0.010% Cr 1.4% Mo 0.5% Ni 1% B 0.04%. Mechanical Property: HB 360-430 The physical performance of the steel plate is about 1000MPa, and the tensile strength is about 1100MPa.

Buy prime quality and sizzling sale put on resistant metal plate in bulk with GNEE which is one of the leading wear resistant metal plate producers and suppliers in China. Our factory additionally presents free pattern for high quality checking. NM400 is a high Nm400 steel plate supplier power wear-resistant steel plate. Its mechanical properties are 3 occasions to five occasions that of strange low alloy metal plates, and it could possibly significantly improve the wear and tear resistance of mechanical parts.

Nm400 Nm500 Wear Resistant Steel Plate; Nm500 Ar500 Wear Resistant Steel Plate; Quard400 Abrasion Wear Resistant St china nm 400 nm450 wear resistant steel sheet Ar400 Abrasion Wear Resistant Steel china nm 400 nm450 put on resistant steel sheet Abrasion Resistant Nm450 Nm500 Wear china nm 400 nm450 put on resistant steel sheet Steel Cold Rolled 2b Surf china nm 400 nm450 wear resistant steel sheet corten steel plant pot for outside; S355J2WP Hot Rolled Corten Steel Sheet; 50Mn2V Steel Plate; ABS Grade A china nm 400 nm450 put on resistant steel sheetNM400 put on/ abrasion resistant metal plate with improved china nm 400 nm450 wear resistant steel sheetNM400 is one sort of Chinese wear/abrasion resistant metal plates, which is properly received in center east and Africa. An NM400 put on-resistant metal was scorching rolled after which the plates had been heat-handled by direct quenching and tempering and reheat quenching and tempering techniques, respectively.NM400,NM 400 STEEL PLATE__Steel Suppliernm400,nm 400 steel plate NM400 is an abrasion resistant plate with a hardness of 400 HBW, supposed for applications the place demands are imposed on abrasion resistance together with good chilly bending properties. NM400 put on/ abrasion resistant steel plate NM400 is one sort of Chinese put on/abrasion resistant metal plates, which is properly obtained in center east and Africa. An NM400 wear-resistant metal was sizzling rolled after which the plates were heat-treated by direct quenching and tempering and reheat quenching and tempering techniques, respectively.NM400 put on/ abrasion resistant metal plate with improved nm500 nm400 abrasion hardness put on resistant metal plateNM400 is one type of Chinese put on/abrasion resistant steel plates, which is well acquired in center east and Africa. An NM400 wear-resistant metal was scorching rolled after which the plates were heat-handled by direct quenching and tempering and reheat quenching and tempering techniques, respectively.Wear Resistance Steel Plate – GangsteelWear Resistance Steel Plate NM 500,NM 500 STEEL PLATE NM500 is an abrasion resistant plate with a hardness of 500 HBW, supposed for applications the place demands are imposed on abrasion resistance in combination with good chilly bending properties.

About forty three% of these are Steel Sheets, 0% are Stainless Steel Sheets. A broad number of abrasion resistant steel plate nm360 options are available to you, similar to technique, kind, and processing service.China 304 Checkered Embossed Stainless Steel Sheet Best Stainless Steel Plate, Checkered Plate, Chequered Plate manufacturer / provider in China, offering 304 Checkered Embossed Stainless Steel Sheet Best Price, Xar500 Ar Nm400 Steel Plate, Ar Xar450 Nm450 Wear Resistant Steel Plate and so forth.

high GB-T 24186 NM400 Wear resistant stainless steel

GB/T NM400 High strength abrasion resistant metal plate for building machine in the quenched, tempered condition and TMCP heat therapy. NM400 Chemical requirement GradeNM400 put on/ abrasion resistant metal plate with improved nm400 high strength abrasion resistant steel plateNM400 is one kind of Chinese put on/abrasion resistant metal plates, which is nicely acquired in center east and Africa. An NM400 put on-resistant steel was hot rolled and then the plates were warmth-treated by direct quenching and tempering and reheat quenching and tempering methods, respectively.NM400 wear/ abrasion resistant steel plate with improved nm400 high strength abrasion resistant metal plateNM400 is one sort of Chinese put on/abrasion resistant metal plates, which is properly acquired in center east and Africa. An NM400 put on-resistant metal was scorching rolled and then the plates have been warmth-handled by direct quenching and tempering and reheat quenching and tempering techniques, respectively.

NM400 Abrasion resistant steel plate Name: N is Nai (Nai), M is the first Pinyin letter of two Chinese characters (mo), and 400 represents the average Brinell hardness of this steel plate. Heat treatment: high temperature tempering, quenching + tempering (tempering). Performance: The yield is over 800, and the tensile strength is over 1000.

what are GB-T 24186 NM400 Wear resistant steels

  • An NM400 put on-resistant steel was sizzling rolled after which the plates had been warmth-handled by direct quenching and tempering and reheat quenching and tempering methods, respectively.NM400 put on/ abrasion resistant steel plate with improved nm500 nm400 abrasion hardness wear resistant metal plateNM400 is one sort of Chinese put on/abrasion resistant steel plates, which is properly acquired in center east and Africa.
  • An NM400 put on-resistant metal was scorching rolled after which the plates have been warmth-handled by direct quenching and tempering and reheat quenching and tempering techniques, respectively.NM400,NM 400 STEEL PLATE__Steel Suppliernm400,nm 400 steel plate NM400 is an abrasion resistant plate with a hardness of 400 HBW, meant for applications where demands are imposed on abrasion resistance in combination with good chilly bending properties.
  • An NM400 put on-resistant steel was sizzling rolled and then the plates had been heat-handled by direct quenching and tempering and reheat quenching and tempering techniques, respectively.Wear Resistance Steel Plate – GangsteelWear Resistance Steel Plate NM 500,NM 500 STEEL PLATE NM500 is an abrasion resistant plate with a hardness of 500 HBW, intended for applications the place calls for are imposed on abrasion resistance in combination with good chilly bending properties.
  • NM400 put on/ abrasion resistant steel plate NM400 is one type of Chinese put on/abrasion resistant metal plates, which is well obtained in center east and Africa.
  • Nm400 Nm500 Wear Resistant Steel Plate; Nm500 Ar500 Wear Resistant Steel Plate; Quard400 Abrasion Wear Resistant St china nm 400 nm450 put on resistant metal sheet Ar400 Abrasion Wear Resistant Steel china nm 400 nm450 put on resistant steel sheet Abrasion Resistant Nm450 Nm500 Wear china nm 400 nm450 put on resistant metal sheet Stainless Steel Cold Rolled 2b Surf china nm 400 nm450 wear resistant metal sheet corten steel plant pot for out of doors; S355J2WP Hot Rolled Corten Steel Sheet; 50Mn2V Steel Plate; ABS Grade A china nm 400 nm450 wear resistant metal sheetNM400 put on/ abrasion resistant metal plate with improved china nm 400 nm450 put on resistant metal sheetNM400 is one kind of Chinese wear/abrasion resistant metal plates, which is properly received in middle east and Africa.

Therefore, the service life of machinery and the production value are decreased.NM400 High power Abrasion resistance platesWith high velocity growth of expertise and modern business,manufactures are more doubtless to use high energy abrasion resistance metal plates so as to cut back the financial misplaced brought by half put on.NM400 under GB/T24186 are mainly used for charging cranes,excavators,dumpers,conveyers,vehicles,breaking and cutting instruments,waste disposal and recovery NM400 Steel Plates Manufacturer, ExporterNM400 metal plates are demanded widely by many commercial industries as they provide nice put on resistance, high strength and thus significantly improving wear resistance of heavy mechanical components. presents 1,439 abrasion resistant metal plate nm360 merchandise.

Abrasion resistant stainless-steel W NM400 is excessive resistant metal,its average hardness is 400 HBW,its Yield strength is greater than 1050,and its mechanical property is more tan 1250 Mpa.NM400-Abrasion resistant steel plates/Bulletproof metal nm400 high strength abrasion resistant metal plateAbrasion resistant stainless-steel W NM400 is excessive resistant metal,its common hardness is 400 HBW,its Yield energy is more than 1050,and its mechanical property is more tan 1250 Mpa.AR400 & AR500 Steel Plate – AR500 Armor | Clifton SteelAbrasion Resistant, Impact Resistant & Wear Resistant Steel Plate AR400 Steel, AR500 Steel, A514, Manganese Steel, Armor Plate + More. Since 1971 we now have supplied personal service and metal fabrication experience to a wide range of industries together with army, aggregates, mining, metal, glass, paper, scrap recycling and railroad.

Jis Astm Best Selling Sulphuric Acid Anti Wear Abrasion Nm400 Nm450 Wear Resistant Steel Plate/sheet Price

GNEE is among the leading put on resistant metal plate manufacturers and suppliers in China. With bulk products in inventory in our factory, we warmly welcome you to buy the recent sale wear resistant metal plate with aggressive worth from us. For detailed chemical composition, welcome to contact us. The free pattern can be out there for high quality checking.

NM500 is a kind of high strength wear-resistant metal plate, which has excessive put on resistance, hardness value reached 500 is to offer protection in place or place need to put on, resulting in longer equipment life, scale back maintenance and restore to bring down, a corresponding discount in capital investment.NM Wear Resistant Steel PlateNM Wear Resistant Steel Plate NM500 is an abrasion resistant plate with a hardness of 500 HBW, supposed for applications the place calls for are imposed on abrasion resistance together with good cold bending properties.NM400 wear resistant steel – Sell varied grades of metal nm500 nm400 abrasion hardness put on resistant metal plateNM400 put on resistant metal plates are made in accordance with Chinese normal, combined the properties together with high power, excessive hardness, high wear resistant, weldable and bendable. GBT24186 NM500 excessive power abrasion resistant steel plates present protection in place or place that must be wear resistant, leading to longer gear life, much less upkeep and corresponding reduction in capital investment. NM500 High strength abrasion resistant steel plate,NM500 GB/T NM500 High energy abrasion resistant metal plate for development machine within the quenched, tempered condition and TMCP heat therapy. NM500 Chemical requirement GraNm500 Abrasion Resistant High Strength China Wear Steel PlateSteel Plate, Wear Plate, High Strength Steel Plate producer / provider in China, offering Nm500 Abrasion Resistant High Strength China Wear Steel Plate, Prime Customized Pattern PPGI Prepainted Galvanized Steel Coil with Flower, Flower Design PPGI Coil Wood Grain Design Prepainted Steel Coil Best Quality and so forth.Nm500 Nm400 Nm450 Nm360 Ar500 Ar450 Ar360 Ar400 Abrasion nm500 nm400 abrasion hardness wear resistant metal plateNM500 NM400 NM450 NM360 AR500 AR450 AR360 AR400 abrasion resistant metal plate Product Description XAR450 is an abrasion resistant plate with a hardness of 480HBW, meant for functions the place demands are imposed on abrasion resistance together with good chilly bending properties.

Gb T24186 Nm500 Abrasive Steel Plates For Export

Therefore, materials NM400 can significantly enhance the abrasion resistance of related machine parts, which additional improve the service life of equipment and lowering the manufacturing cost. The floor hardness of GBT24186 NM400 abrasion resistant steel plate is usually 360 to 450HB.GNEE STEEL | GNEE STEEL provide NM360,NM400,NM450,NM500,NM550,HARDOX400,HARDOX450, HARDOX500,HARDOX550, HARDOX600,Wear resistant steel plate,abrasion-resistant steel,steel plateHeat resistant steel plate/Sheet NM400 WNM400We are professional put on-resistant metal suppliers,put on resistant steel plate is committed to home and imported metal NM360, NM400, NM450, NM500, NM550, NM600 ,NM650bulk sales, warehouse, slicing and distribution.

NM400 Abrasion resistant steel plate Equal Grade:China Wugang: WYJ/WJX WNM400, Wuhan Iron and Steel: WISCO NM400, BAOSTEEL: HARD HARDOX400, Xinyu mill: Q/XGJ NM400, Shougang: JX62 NM400.