Gb-t 24186 Nm400 Abrasion Resistant Steel Tube
We produce and export GB/T 24186 NM400 Abrasion resistant steel plate, GB/T 24186 NM400 Wear resistant steel plate, GB/T 24186 NM 400 Cutting steel plate, NM 400 machined parts.NM400 Stocklist in 3-5days base on China warehouse and factory.
NM400 Abrasion resistant steel chemical composition max: C 0.25% Si 0.70% Mn 1.6% P 0.025% S 0.010% Cr 1.4% Mo 0.5% Ni 1% B 0.04%. Mechanical Property: HB 360-430 The physical performance of the steel plate is about 1000MPa, and the tensile strength is about 1100MPa.
We produce and export GB/T 24186 NM400 Abrasion resistant steel plate, GB/T 24186 NM400 Wear resistant steel plate, GB/T 24186 NM 400 Cutting steel plate, NM 400 machined parts.NM400 Stocklist in 3-5days base on China warehouse and factory.
NM400 Abrasion resistant steel chemical composition max: C 0.25% Si 0.70% Mn 1.6% P 0.025% S 0.010% Cr 1.4% Mo 0.5% Ni 1% B 0.04%. Mechanical Property: HB 360-430 The physical performance of the steel plate is about 1000MPa, and the tensile strength is about 1100MPa.
Content
GBT24186 NM400 excessive strength abrasion resistant metal plate has quite excessive mechanical power. The mechanical properties of NM400 metal is 3 times to 5 occasions than that of strange low alloy steel plates. Therefore, material NM400 can considerably enhance the abrasion resistance of associated machine parts Nm400 steel plate supplier, which additional improve the service life of equipment and decreasing the manufacturing cost. The floor hardness of GBT24186 NM400 abrasion resistant metal plate is normally 360 to 450HB. of excessive strength abrasion resistant steel plates for construction machine.
Get contact particulars & address of corporations engaged in wholesale trade, manufacturing and supplying Abrasion Resistant Steel Plates, ABREX Steel Plates throughout India. Administrative Organization National Steel Standardization Technical Committee Regulation National Standard Approval Announcement 2009 No.9 (Total No.149) Proposing group China Iron and Steel Association Issuing company Administration of Quality Supervision, Inspection and Quarantine of People’s Republic of China; Standardization Administration of China Summary This normal specifies the mechanical engineering grade metal with high power wear-resistant, dimensions, shape, test methods, , weight and tolerance, technical necessities for inspection rules, packaging, marking and quality certification.
Order trial material I’m interested abrasion hardness wear resistant steel plate nm500 nm400NM 500,NM 500 STEEL PLATE__Steel SupplierNM500 is an abrasion resistant plate with a hardness of 500 HBW, supposed for applications the place calls for are imposed on abrasion resistance in combination with good chilly bending properties. AR400 is through-hardened, abrasion resistant, alloy wear plate. Hardness vary is 360/440 BHN with a nominal hardness of 400 BHN. This plate product is intended to be used in functions where a great stability of formability, weldability, toughness and abrasion resistance AR400 & AR500 Wear Plate & Bar | Specialty Steel Co.AR400 is through-hardened, abrasion resistant, alloy put on plate. This plate product is intended to be used in functions the place an excellent steadiness of formability, weldability, toughness and abrasion resistance Abrasion Resistant Steel Plates – ABREX Steel Plates put on resistant carbon metal plate with nm300 nm600 gbFind here Abrasion Resistant Steel Plates, ABREX Steel Plates wholesaler & Wholesale Dealers in India.
WZB-NM360, WZB-NM400, WZB-NM500, WZB-NM500, WZB-NM550 are steel grades of wear and tear metal plate made of Wugang, which is used for top put on and excessive influence applications, it can also be used as high power structural metal with yield strength bigger than 800MPa. The premise of the metal plate has a great influence toughness and welding performance hot rolled nm400 nm500 wear resistant steel plate in stock abrasion hardness wear resistant steel plate nm500 nm400NM400 wear/ abrasion resistant metal plate with improved NM400 is one sort of Chinese wear/abrasion resistant metal plates, which is nicely acquired in center east and Africa.
NM400 Abrasion resistant steel plate Name: N is Nai (Nai), M is the first Pinyin letter of two Chinese characters (mo), and 400 represents the average Brinell hardness of this steel plate. Heat treatment: high temperature tempering, quenching + tempering (tempering). Performance: The yield is over 800, and the tensile strength is over 1000.
- The energy is excessive, and might absorb energy through the strategy of impact.
- NM400 is one sort of Chinese wear/abrasion resistant metal plates , which is properly acquired in middle east and Africa.
- An NM400 wear-resistant metal was hot rolled and then the plates have been warmth-treated by direct quenching and tempering and rNM400 put on/ abrasion resistant metal plate with improved abrasion hardness put on resistant metal plate nm500 nm400NM400 is one sort of Chinese put on/abrasion resistant steel plates , which is nicely received in center east and Africa.
- An NM400 wear-resistant steel was hot rolled and then the plates were warmth-handled by direct quenching and tempering and rNm500 wear sheet lithuania – kpsmeubel.nlGBT NM500 put on-resistant metal plate is a double layer metallic construction, the wear and tear-resistant layer and the bottom material are metallurgical bonding.
NM400 is one sort of Chinese wear/abrasion resistant metal plates , which is well obtained in center east and Africa. An NM400 wear-resistant steel was sizzling rolled after which the plates had been heat-treated by direct quenching and tempering and rNM400 put on/ abrasion resistant metal plate with improved abrasion hardness put on resistant metal plate nm500 nm400NM400 is one sort of Chinese wear/abrasion resistant metal plates , which is properly acquired in center east and Africa. An NM400 wear-resistant metal was scorching rolled after which the plates have been heat-treated by direct quenching and tempering and rNm500 put on sheet lithuania – kpsmeubel.nlGBT NM500 put on-resistant metal plate is a double layer metallic structure, the wear and tear-resistant layer and the base material are metallurgical bonding. The strength is excessive, and may take up energy through the means of impact. NM500 steel may be applied to the circumstances of strong vibration and impression.
China Gb/t 24186 Nm400 Abrasion Resistant Steel Plate
This normal applies to mining, building, agriculture and development equipment put on-resistant structural elements with thickness lower than eighty mm of steel. Wear plate requirements of this normal can be applicable to different areas.
GB-T 24186 NM400 Abrasion resistant steel chart
Wear Resistance Steel Plate NM400,NM 400 STEEL PLATE NM400 is an abrasion resistant plate with a hardness of 400 HBW, supposed for applications where demands are imposed on abrasion resistance in combination with good chilly bending properties.NM400 High strength abrasion resistant metal plate,NM400 abrasion hardness put on resistant metal plate nm500 nm400NM400 High power abrasion resistant steel plate,NM400 GB/T NM400 High power abrasion resistant steel plate for building machine in the quenched, tempered condition and TMCP warmth remedy. NM400 Chemical requirement GraNM500 Abrasion Resistant Steel Plate Suppliers and abrasion hardness wear resistant metal plate nm500 nm400Wear Resistance Steel Plate NM 500,NM 500 STEEL PLATE NM500 is an abrasion resistant plate witha hardness of 500 HBW, supposed for applications the place calls for are imposed on abrasion resistance incombination with good chilly bending properties. GNEE STEEL supply NM360,NM400,NM450,NM500,NM550,HARDOX400,HARDOX450, HARDOX500,HARDOX550, HARDOX600,Wear resistant metal plate,abrasion-resistant metal,steel plateHardox Easy to kind, wear-resistant steel from SSAB abrasion hardness put on resistant metal plate nm500 nm400The all-around metal that resists wear and abrasion. Hardox® 400 is an abrasion-resistant steel with a nominal hardness of 400 HBW. Thanks to its excessive toughness, good bendability and weldability, this steel can be utilized in buildings with reasonable put on.
Bebon International is a professional GBT24186 NM400 high energy abrasion resistant metal plates for construction machine metal exporter and a steel Stockist in china. We hold greater than a thousand tons GBT24186 NM400 high strength abrasion resistant steel plates for construction machine metal in stock every month. If you need to get the GBT24186 NM400 excessive power abrasion resistant steel plates for building machine steel value, please don’t hesitate to contact us. Any want in GBT24186 NM400 excessive strength abrasion resistant steel plates for construction machine Chemical Composition and Mechanical Properties, please be happy to contact us by e-mail or calling to us.
NM400 Abrasion resistant steel plate Equal Grade:China Wugang: WYJ/WJX WNM400, Wuhan Iron and Steel: WISCO NM400, BAOSTEEL: HARD HARDOX400, Xinyu mill: Q/XGJ NM400, Shougang: JX62 NM400.