EN 10025-6 S500Q carbon steel plate gauges

We supply and export EN 10025-6 steel plate S500Q 1.8924. EN10025-6 S500Q and 1.8924 cutting parts which specification is a high yield strength structural steels in the quenched and tempered. The condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel grade.

Any reliance you place on such information is therefore strictly at your individual risk. This metal is assessed in accordance with BS EN and identified in accordance with the relevant Standard BS EN elements 2-5. Nickel – Monel® – Inconel® – Incoloy® – Hastelloy® – Alloy 20 – Duplex Trademark Notice -Some names are commerce names and/or logos of specific producers. Ashtapad Overseas, Mumbai, India just isn’t affiliated with any manufacturer. Orders shall be stuffed to fulfill specs from any obtainable supply. Names are listed solely for reference to help establish merchandise consistent with listed specifications. We don’t supply any help over buying or selling any merchandise.

S620QL1

What is EN 10025-6 S500Q chemical?
EN10025-6 S500Q quenched and tempered steel plate Chemical composition

What is EN 10025-6 S500Q Equal Grade.
S500Q and S500QL steel plates are German standard high-strength structural steels, usually called high-strength plates, equivalent to the national standard Q500D,
It is widely used in construction machinery and mining machinery.
S500QL steel standard: EN 10025/6-2004 delivery status: quenched and tempered. S500Q series are: S500Q, S500QL, S500QL1.Second, S500Q chemical composition: The quality of S500Q is divided into three levels

What is application of EN10025-6 S500Q?
Used in buildings, bridges, ships, vehicles, pressure vessels and other structures, the carbon content (melting analysis) is generally not more than 0.20%, the total content of alloying elements is generally not more than 2.5%, the yield strength is not less than 295MPa, and it has good impact toughness
And low alloy steel with welding function.

What is EN 10025-6 S500Q mechanical properties?
EN10025-6 S500Q quenched and tempered steel plate mechanical properties

1. There is no code for the first level: S500Q: P: ≤0.025, S: ≤0.015;
2. The L-level code L is expressed as S500QL: P: ≤0.020, S: ≤0.010;
3. The L1 code L1 is expressed as S500QL1: P: ≤0.020, S: ≤0.010
4. The other ingredients are the same, as shown below:
C:≤0.20, Si:s0.80, Mn:s1.70, N:≤0.015, B:≤0.0050, Cr:s1 .50, Cu:0.50, Mo:0.70,
Nb: 0.06, Ni: s2.0, Ti: s0.05, V: ≤0.12, Zr: ≤0.15
3. Application and prospect of S500Q S500QL/S500QL1
S500Q applies construction machinery, mining machinery, coal mine machinery such as hydraulic supports, crane extension arms, crane extension arms,
Excavator support arm, etc.
Mainly used in the manufacture of hydraulic supports with high welding performance, heavy vehicles, construction machinery, and port machinery.
4. S500Q series steel plate low-alloy high-strength structural steel:
5, S500Q series steel plate series performance specifications: this trademark fulfills the EN 10025/6-2004 European standard specifications.
6. Packaging, marking and quality certificate of S500Q series steel plate: The packaging, marking and quality certificate of steel plate shall comply with the rules of GB/T 247

S460Q excessive power metal plate also named as S460Q high power low alloy metal plate beneath steel stand EN which is for hot rolled structural steels with high yield energy and tensile vitality in quenched and tempered supply situation.Quenching operation which consists of cooling a ferrous steel plate extra rapidly than in nonetheless air.Tempering heat therapy utilized to a ferrous S460Q / 1. If specified on the time of order the metal making course of shall be reported to the purchaser.The low temperature impacting take a look at for prime power metal plate S620QL1 should be achieved at minus 60 centigrade. EN S960Q metal plates are beneath normal BS EN , as identical as S460Q/S460QL/S460QL1, S500Q/S500QL/S500QL1, S550Q/S550QL/S550QL1, S620Q/S620QL/S620QL1, S690Q/S690QL/S690QL1, S890Q/S890QL/S890QL1, S960QL and S960QL1. In these steel grades, L means -forty diploma low temperature impression check out, L1 means -60 diploma temperature influence take a look at. Strength [] Yield strengtYield energy is the most typical property that the designer will want as it’s the basis used for a lot of the guidelines given in design codes.In European Standards for structural carbon steels , the first designation relates to the yield energy, e.g. S355 metal is a structural steel with a specified minimal yield energy of 355 . SSAB is the world’s most expert producer of excessive-end quenched and tempered steels.

EN 10025-6 S500Q steel wire

• They may also contain by weight not more than 1 % of aluminum however no different element in a proportion that may give the metal the characteristics of another alloy steel.
• Razor blade steelFlat-rolled merchandise of stainless steel not over 0.25 mm in thickness and not over 23 mm in width, and containing by weight not over 14.7 p.c of chromium, licensed at the time of entry for use within the manufacture of razor blades.
• Silicon electrical steelAlloy steels containing by weight no less than 0.6 % but not more than 6 percent of silicon and not more than 0.08 p.c of carbon.
• Heat-resisting steelAlloy steels containing by weight lower than 0.three % of carbon and four percent or more but less than 10.5 percent of chromium.
• These standards relate to the supply circumstances for alloy and non-alloy steels supplied in chilly rolled strips of as much as 600mm width for heat treatment The metal names in these standards are allocated based on BS EN and CR and the metal numbers are allotted in accordance with BS EN .

The normal situation on delivery of this steel is Quenched and Tempered. The steels are named based on BS EN and numbered in accordance with BS EN . Steels provided to this normal are suitable for hardening and within the quenched and tempered condition have good toughness at a given tensile power. The steel numbers consist of 1 adopted by some extent and four figures. As an instance the metal numbers of the above-mentioned steels are 1,8836 and 1,4307. The steel numbers are allotted by a European Registering Office. The registering authority has been given to VDEh in Dusseldorf.

The proven fact that BSI and the opposite national our bodies publish EN does not compel folks to use them. (Note the continued use of the BS ‘Emergency Number’ sequence of steels years after they’ve been officially changed. Only when suppliers and customers absolutely accept and perceive European Standards, will it really happen. The goal is to produce a logical, widespread pattern,by which items are standardised in one document only, reference being made to this doc from different requirements. For example, tensile testing methods are standardised in a unique document to material property values, and dimensional tolerances in other separate requirements. Thus, changed requirements want only to be written into one doc. not more than 0.fifty five %, in the aggregate, of copper, nickel and chromium. Concrete reinforcing bars and rodsHot-rolled bars and rods containing indentations, ribs, grooves or different deformations produced during the rolling course of or twisted after rolling.

S550Q steel plate is a hydroelectric metal plate, which is a low-alloy excessive-energy metal plate. It has the characteristics of excessive yield and extra strengthening alloy parts. Gangsteel cooperated with HBIS Wuyang mill to export excessive yield strength metal plate and Gangsteel have lots manufacturing expertise in extreme energy steel grade. For the needs of the tariff schedule, the expression excessive-nickel alloy steel refers to alloy metal containing by weight 24 % or extra of nickel, with or with out different elements. High-velocity steelAlloy steels containing, with or without different components, a minimum of two of the three elements molybdenum, tungsten and vanadium with a mixed content material by weight of 7 % or more, 0.6 p.c or more of carbon and three to 6 percent of chromium. The excessive carbon metal plates import commerce sector contributes considerably to the overall GDP percentage of India.

EN10025-6 S500Q 1.8924 unit weight of carbon steel plate

No surprise, the port is booming on this sector and at Seair, we higher understand the way to benefit you from this welcome alternative. We comprehend the fact that majority of import companies in are lively in sourcing distinct ranges of merchandise together with raw supplies, machinery and consumer items and so on.

EN TypeB 16mo3 Steel Reducing Tees Reducing tee is a kind of pipe becoming in which the branch port size is smaller than the ports of the run. Reducing tee is a type of pipe fitting by which the branch port size is smaller than the ports of the run.

Description by Manufacturer
Sell: EN10025-6 S500Q, S500QL, S500QL1 Steel plate
1. Steel Grade :EN10025-6 S500Q, S500QL, S500QL1 S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.
2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm
3. Adopt Standard: EN 10025-6.
4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate
6. Payment Item: 30% TT, or LC and TT
7. Trade Terms: FOB, CFR, CIF
8. Delivery Time: 30-40days