EN10025-6 S500Q 1.8924 carbon steel plate flanges

We supply and export EN 10025-6 steel plate S500Q 1.8924. EN10025-6 S500Q and 1.8924 cutting parts which specification is a high yield strength structural steels in the quenched and tempered. The condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel grade.

EN10025-6 S500Q 1.8924 carbon steel plate 1/2

from hydraulic shocks and vibration , an element of security of two,5 shall suffice. maintain the take a look at load in the occasion of switching off or failure of the hoist drive. the case of grabs and buckets for bulk supplies, with their capacity and name of producer. Ladders over 5 m in height shall be supplied with security hoops starting at a top of two,5 m. The driver’s cab must be able to transfer independently of the load. shall be protected in opposition to their entry and supplied with a clear air supply.

  • Hybox® 355 absolutely complies with the European Standard for cold shaped structural hollow sections, EN10219 S355 J2H and is used in a wide range of building and mechanical associated purposes including wind bracing and machinery.
  • It presents a consistent profile, which fully complies with the dimensional tolerances of EN10219, excluding mass.
  • The Strongbox® material, which offers a minimal yield power of 235 N/mm2, is manufactured in accordance with an internal specification.
  • Strongbox® 235 supplies the energy with weldability, good galvanising traits and ease of manipulation that is needed for its use in a variety of applications in the agricultural and engineering sectors.
  • Hybox® 355 is classed as a excessive energy chilly formed hole section suitable to be used in construction and mechanical functions where managed specifications and related design regulations apply.

This product is environmentally friendly and a cost efficient solution to help meet ELV targets and reduce end-of-life recycling prices. Our in-house logistics groups are consultants in consolidating materials from multiple sources, arranging multiple packaging and ensuring that goods arrive on time, in glorious condition and at the desired locations, wherever that’s in the world. These groups frequently handle production, processing, high quality assurance, inspection, documentary requirements and customs clearance formalities. Any reliance you place on such data is subsequently strictly at your particular person hazard. This metallic is classed in accordance with BS EN and acknowledged in accordance with the related Standard BS EN elements 2-5.

EN10025-6 S500Q 1.8924 6mm carbon steel plate

EN10025-6 S500Q 1.8924 astm a537 class 1 carbon steel plates

on which the load is moved, can assume domestically under the affect of the traditional loading. extension of TD and a fantastic parallel to the axis of the n values, passing through D. Where the variety of stress cycles is less than 8 000, such checking isn’t needed. the fatigue strength of a element according to a group in which the element is classified.

S500Q steel plate

What is EN 10025-6 S500Q chemical?
EN10025-6 S500Q quenched and tempered steel plate Chemical composition


C %

Si %

Mn %

P %

S %

N %

B %

Cr %











Cu %

Mo %

Nb %

Ni %

Ti %

V %

Zr %












What is EN 10025-6 S500Q Equal Grade.
S500Q and S500QL steel plates are German standard high-strength structural steels, usually called high-strength plates, equivalent to the national standard Q500D,
It is widely used in construction machinery and mining machinery.
S500QL steel standard: EN 10025/6-2004 delivery status: quenched and tempered. S500Q series are: S500Q, S500QL, S500QL1.Second, S500Q chemical composition: The quality of S500Q is divided into three levels

What is application of EN10025-6 S500Q?
Used in buildings, bridges, ships, vehicles, pressure vessels and other structures, the carbon content (melting analysis) is generally not more than 0.20%, the total content of alloying elements is generally not more than 2.5%, the yield strength is not less than 295MPa, and it has good impact toughness
And low alloy steel with welding function.

What is EN 10025-6 S500Q mechanical properties?
EN10025-6 S500Q quenched and tempered steel plate mechanical properties



Min Yield (Mpa)

Tensile (MPa)

Elongation (%)

Min Impact Energy




Min 500Mpa




Min 27J



Min 480Mpa




Min 27J



Min 440Mpa




Min 27J


Section sizes Full range of European, ASTM W-section as well as BS4 sizes can be found on request. These comparability tables are solely meant as a sign of the closest known equivalent grades. The source standards should all the time be checked for the particular function for each material, in case of doubt. Tata Steel International is a leading provider of structural products into the Offshore Oil & Gas industry. For over 40 years we have manufactured the Colorcoat® range of pre-finished merchandise. Colorcoat® products have been developed specifically to support the aesthetic and useful necessities of recent architecture. Colorcoat® includes pre-completed metal products with unique coating formulations providing lengthy-term efficiency and probably the most complete ensures obtainable.

1. There is no code for the first level: S500Q: P: ≤0.025, S: ≤0.015;
2. The L-level code L is expressed as S500QL: P: ≤0.020, S: ≤0.010;
3. The L1 code L1 is expressed as S500QL1: P: ≤0.020, S: ≤0.010
4. The other ingredients are the same, as shown below:
C:≤0.20, Si:s0.80, Mn:s1.70, N:≤0.015, B:≤0.0050, Cr:s1 .50, Cu:0.50, Mo:0.70,
Nb: 0.06, Ni: s2.0, Ti: s0.05, V: ≤0.12, Zr: ≤0.15
3. Application and prospect of S500Q S500QL/S500QL1
S500Q applies construction machinery, mining machinery, coal mine machinery such as hydraulic supports, crane extension arms, crane extension arms,
Excavator support arm, etc.
Mainly used in the manufacture of hydraulic supports with high welding performance, heavy vehicles, construction machinery, and port machinery.
4. S500Q series steel plate low-alloy high-strength structural steel:
5, S500Q series steel plate series performance specifications: this trademark fulfills the EN 10025/6-2004 European standard specifications.
6. Packaging, marking and quality certificate of S500Q series steel plate: The packaging, marking and quality certificate of steel plate shall comply with the rules of GB/T 247

Cranes shall be fitted with rail sweeps where materials obstructions can come to relaxation within the track. operation of the crane, a wind indicator and alarm should be offered on the crane.

Contact Us
Email: admin@gangsteel.com
Phone: We supply and export EN 10025-6 steel plate S500Q 1.8924. EN10025-6 S500Q and 1.8924 cutting parts

, ,

subjected to warmth radiation when the crane is in operation shall be manufactured from appropriate security glass. ) to raise the maximum nominal load is calculated as in specific motor kind must be requested from the motor supplier.

are the maximum and minimum values of the corresponding masses. does not exceed a permissible stress dependent on the breaking power of the fabric used. maximum values of each of the three stresses to happen concurrently. the permissible stress for metal A.fifty two in the case of loading thought of. thereunder, close to the critical stresses for the material. The complete wind load on the construction is taken as the sum of the masses on its part elements. S355 structural grade carries minimal yield power of 355 N/mm²m, the JR designation confirms that the hyperlink for you metal has undergone longitudinal Chary V-Notch influence testing at 27J at room temperature.

EN 10025-6 S500Q carbon plate steel products llc

Nucor, Liberty Steel hiking US wire rod prices – S&P Global

Nucor, Liberty Steel hiking US wire rod prices.

Posted: Tue, 08 Dec 2020 17:44:00 GMT [source]

In-house proprietary grades for Zinc and Zinc-Iron are Galvalite, Aluminium-Zinc is Galvalloy (95%Zn/5% Al), Aluminium-Silicon is Aludip. Neotec™ is a lead free metallic coated metal, designed to help evaporation emissions from gas tanks and meet recycling targets.

Description by Manufacturer
Sell: EN10025-6 S500Q, S500QL, S500QL1 Steel plate
1. Steel Grade :EN10025-6 S500Q, S500QL, S500QL1 S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.
2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm
3. Adopt Standard: EN 10025-6.
4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate
6. Payment Item: 30% TT, or LC and TT
7. Trade Terms: FOB, CFR, CIF
8. Delivery Time: 30-40days