EN10025-6 S500Q 1.8924 carbon steel plate specification

We supply and export EN 10025-6 steel plate S500Q 1.8924. EN10025-6 S500Q and 1.8924 cutting parts which specification is a high yield strength structural steels in the quenched and tempered. The condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel grade.

However, if strict technical comparability rules had been applied, Grade SCNCrM 2 could be rejected based mostly on its greater manganese content material when evaluating it to SC 4330. In that case, SC 4330 could be rejected since it would not have a comparative metal . The same argument could possibly be made when evaluating GS-33 CrNiMo and G30NiCrMo8 within the second group, where the differing nickel contents might be a foundation for rejection on a stricter comparison. A traditional closest match example is shown in Table 1.3, the place compared to the three different steels in this group, the 4 grades within EN are completely different; and a few could argue that, on this foundation, it doesn’t belong to this comparative group.

Comparing metal requirements is not a precise science and cannot be made into a mathematical equation where two sides of an equation are equal to at least one another, since there’ll all the time be variations between requirements. These variations could also be vital to one consumer, but not significant to a different consumer. Therefore, this handbook makes use of the time period comparative to denote comparable standards which were compared to one another. Comparative is a relative word that is inevitably dependent upon the end consumer’s necessities, who is finally liable for selecting the suitable metal for a particular utility. For instance, EN ISO 4957 ­ Tool Steels, is a standard that is shared throughout the European Committee for Standardization and the International Standards Organization systems.

EN10025-6 S500Q 1.8924 3/4 carbon steel plate

EN10025-6 S500Q 1.8924 1045 carbon steel plate

Since there was insufficient house on a web page to position each the chemical composition and mechanical properties tables, they have been break up into two separate tables. To help the person in keeping observe of the comparability standards used for a given steel, each table inside a chapter was sequentially numbered and appended with the letter A or B.

stabilizing therapy, n–any remedy meant to stabilize the microstructure or dimensions of a steel object. stress relieving, n–heating a steel object to an acceptable temperature, holding it long enough to cut back residual stresses, after which cooling it slowly sufficient to reduce the development of latest residual stresses. surface hardening, n–a generic term overlaying any of several processes that, by quench hardening only, produce in a metal object a floor layer that is tougher or more wear resistant than the core.

U.S. Steel to Buy Remaining Stake in New, Low-Cost Steel Mill – The Wall Street Journal

U.S. Steel to Buy Remaining Stake in New, Low-Cost Steel Mill.View Full Coverage on Google News

Posted: Tue, 08 Dec 2020 15:22:00 GMT [source]

temper brittleness, n–brittleness that outcomes when sure steels are held within, or are cooled slowly by way of, a certain vary of temperature under the transformation range. tempering, n–reheating a quench hardened or normalized metal object to a temperature beneath Ac1, and then cooling it at any desired price.

EN10025-6 S500Q 1.8924 carbon steel plate uk

S500Q steel plate

What is EN 10025-6 S500Q chemical?
EN10025-6 S500Q quenched and tempered steel plate Chemical composition

Grade

C %

Si %

Mn %

P %

S %

N %

B %

Cr %

  S500Q  

0.200

0.800

1.700

0.025

0.015

0.015

0.005

1.500

 

Cu %

Mo %

Nb %

Ni %

Ti %

V %

Zr %

 

 

0.500

0.700

0.060

2.000

0.050

0.120

0.150

 

 

What is EN 10025-6 S500Q Equal Grade.
S500Q and S500QL steel plates are German standard high-strength structural steels, usually called high-strength plates, equivalent to the national standard Q500D,
It is widely used in construction machinery and mining machinery.
S500QL steel standard: EN 10025/6-2004 delivery status: quenched and tempered. S500Q series are: S500Q, S500QL, S500QL1.Second, S500Q chemical composition: The quality of S500Q is divided into three levels

What is application of EN10025-6 S500Q?
Used in buildings, bridges, ships, vehicles, pressure vessels and other structures, the carbon content (melting analysis) is generally not more than 0.20%, the total content of alloying elements is generally not more than 2.5%, the yield strength is not less than 295MPa, and it has good impact toughness
And low alloy steel with welding function.

What is EN 10025-6 S500Q mechanical properties?
EN10025-6 S500Q quenched and tempered steel plate mechanical properties

Grade

Thickness

Min Yield (Mpa)

Tensile (MPa)

Elongation (%)

Min Impact Energy

 

S500Q

8mm-50mm

Min 500Mpa

590-770Mpa

17%

-20

Min 27J

 

51mm-100mm

Min 480Mpa

590-770Mpa

17%

-20

Min 27J

 

101mm-150mm

Min 440Mpa

540-720Mpa

17%

-20

Min 27J

 

S620Q STEEL PLATE_Steel SupplierBBNSTEEL exported EN .2 Certificate of ABS,DNV,LR,BV Class Approval materials S620Q,EN S620Q,S620Q STEEL PLATE.

Contact Us
S500Q STEEL PLATE SUPPLIER
Email: admin@gangsteel.com
Phone: We supply and export EN 10025-6 steel plate S500Q 1.8924. EN10025-6 S500Q and 1.8924 cutting parts

, ,

EN10025-6 S500Q 1.8924 carbon steel griddle plate

1. There is no code for the first level: S500Q: P: ≤0.025, S: ≤0.015;
2. The L-level code L is expressed as S500QL: P: ≤0.020, S: ≤0.010;
3. The L1 code L1 is expressed as S500QL1: P: ≤0.020, S: ≤0.010
4. The other ingredients are the same, as shown below:
C:≤0.20, Si:s0.80, Mn:s1.70, N:≤0.015, B:≤0.0050, Cr:s1 .50, Cu:0.50, Mo:0.70,
Nb: 0.06, Ni: s2.0, Ti: s0.05, V: ≤0.12, Zr: ≤0.15
3. Application and prospect of S500Q S500QL/S500QL1
S500Q applies construction machinery, mining machinery, coal mine machinery such as hydraulic supports, crane extension arms, crane extension arms,
Excavator support arm, etc.
Mainly used in the manufacture of hydraulic supports with high welding performance, heavy vehicles, construction machinery, and port machinery.
4. S500Q series steel plate low-alloy high-strength structural steel:
5, S500Q series steel plate series performance specifications: this trademark fulfills the EN 10025/6-2004 European standard specifications.
6. Packaging, marking and quality certificate of S500Q series steel plate: The packaging, marking and quality certificate of steel plate shall comply with the rules of GB/T 247

case, n–in case hardening, the outer portion that has been made harder than the core because of altered composition or microstructure, or both, from treatments corresponding to carburizing, nitriding, and induction hardening. case hardening, n–a generic term covering any of a number of processes applicable to metal that change the chemical composition or microstructure, or both, of the floor layer. chrome steel, n–a metal that conforms to a specification that requires, by mass percent, a minimum chromium content material of 10.5 or extra, and a maximum carbon content material of less than 1.20. steel, n–a cloth that conforms to a specification that requires, by mass percent, more iron than some other component and a most carbon content of typically lower than 2. It works closely with the European Committee for Electrotechnical Standardization , the European Telecommunications Standards Institute , and the International Organization for Standardization .

  • chilly remedy, n–exposing a steel object to temperatures under room temperature for the aim of acquiring desired situations or properties, corresponding to dimensional or structural stability.
  • conditioning warmth treatment, n–a preliminary heat remedy used to organize a metal object for a desired reaction to a subsequent warmth therapy.
  • If you want additional yield power, you would select our others grade in S690Q, S890Q or S960Q.

Consequently, the data are equal in both methods, however there is only one standard. For instance, ASTM A 485 and EN ISO share seven equivalent bearing metal grade chemical compositions, but the physique of every normal is completely different (that’s, grain measurement, hardenability, microstructure and hardness, inspection, testing, etc.). As a end result, these seven bearing steels inside these two requirements aren’t equivalent, however are comparable. gb6653 hp265 gasoline cylinders steel china Has been committed to the of export metal commerce more than 10 years. Our service entails all types of steel product , including uncooked supplies and processed completed merchandise.

Description by Manufacturer
Sell: EN10025-6 S500Q, S500QL, S500QL1 Steel plate
1. Steel Grade :EN10025-6 S500Q, S500QL, S500QL1 S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.
2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm
3. Adopt Standard: EN 10025-6.
4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate
6. Payment Item: 30% TT, or LC and TT
7. Trade Terms: FOB, CFR, CIF
8. Delivery Time: 30-40days

Uncategorized