the EN 10025-6 S620Q strength steel in figure 7-20
Gangsteel produce and supply materials of EN10025-6 S620q steel plate and equal grade S590Q, S690Q, S690QL, S690QL1, WQ690D, Q550D, WQ590D, WH70Q, WDB620E, WH785E S620q steel plate Executive standard: EN10025-6, GB/T16270-2009.
EN10025-6 S620q Alloy special steel with specified minimum values of impact energy at temperatures not lower than -20 degree .
Chemical composition of steel S620Q (1.8914), Standards of steel S620Q (1.8914) and Mechanical Properties of steel S620Q (1.8914) Equivalent grades of steel S620Q (1.8914)
about the steel S620Q (1.8914) Tensile Strength, Elongation, Proof strength , Hardness, please see our table.
Equivalent grades of steel S620Q (1.8914)Equivalent grades of steel S620Q (1.8914)Heat treatment conditions+A Soft annealed+AC Annealed to achieve spheroidization of the carbides+AR As rolled+AT Solution annealed+C Cold drawn / hard+CR Cold rolled+FP Treated to ferrite-pearlite structure and hardness range+I Isothermal annealing+LC Cold drawn / soft+M Thermo mechanical rolling+N Normalized+NT Normalized and tempered+P Precipitation hardened+PE Peeled+QA Air quenched and tempered+QL Liquid quenched and tempered+QT Quenched and tempered+S Treated to improve shearability+SH As rolled and turned+SR Cold drawn and stress relieved+T Tempered+TH Treated to hardness range+WW Warm worked+U Untreated
Changes in iron alloys going down all through thermal cycles occurring throughout conventional welding are well-known from a few years. However, the traditional welding produces a relatively broad weld that contributes to the deterioration of mechanical properties. Though the impairment of the mechanical efficiency of welds can’t be prevented and utterly eradicated, it might be decreased by producing a really slender warmth affected zone that adjoin to the weld.
Unitedsteel Plate Factory are specialised in producing and exporting S355J2, S355K2, S355K2 and So on. Low alloy and excessive strength steel plate, heavy plate and wide, heavy plate, Which is a big steel plate provider mill. Our inventory warehouse had about 30000tons S355J2, S355JR, S355K2, S355K4Low alloy steel plates. are specialized in producing and exporting S355J2, S355K2, S355K2 and So on. DIN EN S620Q Non- Alloy Structural Steel Plate TJC Steel can provide DIN EN S620Q Structural Carbon Steel Plate, mainly utilized in development within the fields requiring carbon steel plates with kinds of influence exams and strength. Comparing with S620QL1 and S620QL,steel plate S620Q has more accommodates of chemical components P and S in .
- However, the standard welding produces a comparatively broad weld that contributes to the deterioration of mechanical properties.
- Low alloy and high power steel plate, heavy plate and extensive, heavy plate, Which is a big steel plate provider mill.
- Though the impairment of the mechanical effectivity of welds cannot be prevented and utterly eradicated, it could be decreased by producing a very slender heat affected zone that adjoin to the weld.
- Unitedsteel Plate Factory are specialised in producing and exporting S355J2, S355K2, S355K2 and So on.
EN S620Q S620 Q STEEL PLATE BBNSTEEL Grade EN S620Q Specification THK three to 300,Width 1500 to 4050,Length 3000 to Standard Technical supply circumstances for flat products of high yield power structuralEN S620Q Carbon and Low-alloy High-strength SteelEN S620Q Carbon and Low-alloy High-power Steel Plate.WHY CHOOSE US? We often discover that steel plate to EN S690QL is called various things by totally different engineers. S690QL plates are utilized in a wide variety of engineering purposes the place strength is necessary along with cranes, important structural components in constructing and stadia and pipes and gates EN S890QL Carbon and Low-alloy High-power Henan HZZ provides a good selection of top quality EN S890QL carbon and low-alloy extreme-power steel plate with HIC. Having been targeted on numerous steel merchandise for over 20 years, we now brings prospects prime quality products with excessive precision and excessive energy. Gangsteel cooperated with HBIS Wuyang mill to export high yield power metal plate and Gangsteel have a lot production experience in high power metal grade. In particular, new technology of structural steels with excessive yield strengths as well as corrosion resistant ferritic-austenitic steels .
Depending on the thickness of the product and the manufacturing circumstances, the producer may add to the steel one or several alloying components up to the utmost values given to be able to get hold of the required EN10025-6 S620Q steel plate supplier properties. Metline is a specialized supplier of EN S620Q metal sheets and plates. We can supply EN S620Q stress vessel steel plates in a wide range of thickness and sizes at cheap prices.
7. Obtained German TUV certification.
S620Q steel plate uses: used to manufacture low-temperature resistant, high-strength key components, construction machinery, mining machinery structures, etc. It is a high-strength structural steel plate.
European elevation strength alloy steel plate: S460Q, S460QL, S460QL1, S500Q, S500QL, S500QL1, S550Q, S550QL, S550QL1, S590Q, S620Q, S620QL, S620QL1, S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QQL, S960QQL1,
WQ690D, Q550D, WQ590D, WH70Q, WDB620E, WH785E, etc.;
- What is EN 10025-6 S620Q steel plat?
EN10025-6 S620Q steel plate is EN 1.8914, Alloy special steel with specified minimum values of impact energy at temperatures not lower than -20 ° C. The main adopt standard are EN 10025-6: 2004 Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
EN 10137-2: 1996 S620Q Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels
- What is EN 10025-6 S620Q OR 1.8914 Chemical composition % of steel EN 10025-6 S620Q (1.8914): EN 10025-6-2004
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
V |
N |
Nb |
Ti |
Cu |
Zr |
B |
CEV |
max 0.2 |
max 0.8 |
max 1.7 |
max 2 |
max 0.025 |
max 0.015 |
max 1.5 |
max 0.7 |
max 0.12 |
max 0.015 |
max 0.06 |
max 0.05 |
max 0.5 |
max 0.15 |
max 0.005 |
max 0.83 |
- What is Mechanical properties of steel EN 10025-6 S620Q (1.8914)?
Nominal thickness (mm): |
3 – 100 |
100 – 150 |
Rm – Tensile strength (MPa) |
700-890 |
650-830 |
- What is Equivalent grades of steel EN10025-6 S620Q (1.8914)
EU |
Germany |
France |
European old |
|||
S620Q |
|
|
|
EN10025-6 EQUAL Grade stock list in China warehouse |
|||||||
|
Grade |
size mm |
Thick mm |
Wide mm |
Long mm |
Tons |
Quantity |
High-strength structural stee plate |
BS960E |
7*1600*11300 |
7 |
1600 |
11300 |
2.023 |
2 |
|
Q550CFD |
16*2500*12000 |
16 |
2500 |
12000 |
3.768 |
1 |
|
Q550CFD |
16*2500*12000 |
16 |
2500 |
12000 |
3.768 |
1 |
|
Q550CFD |
20*2500*12000 |
20 |
2500 |
12000 |
4.71 |
1 |
|
Q550CFD |
20*2500*12000 |
20 |
2500 |
12000 |
4.71 |
1 |
|
Q550CFD |
20*2500*12000 |
20 |
2500 |
12000 |
4.71 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q550CFD |
36*2500*9500 |
36 |
2500 |
9500 |
6.712 |
1 |
|
Q690CFD |
30*2550*10640 |
30 |
2550 |
10640 |
6.39 |
1 |
|
SC960E |
30*1550*5800 |
30 |
1550 |
5800 |
2.117 |
1 |
|
NQB-S690QL |
20*1700*11000 |
20 |
1700 |
11000 |
2.936 |
1 |
|
BS700MCK2 |
8*1500*13000 |
8 |
1500 |
13000 |
1.227 |
1 |
|
BWELDY620QL6 |
12*2400*6220 |
12 |
2400 |
6220 |
1.406 |
1 |
|
BWELDY620QL6 |
12*2400*9000 |
12 |
2400 |
9000 |
2.035 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.239 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.71 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
5.181 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.71 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
4.71 |
1 |
|
BS700MCK2 |
10*1500*4000 |
10 |
1500 |
4000 |
1.884 |
4 |
|
BS700MCK2 |
10*1500*6000 |
10 |
1500 |
6000 |
2.12 |
1 |
|
BS700MCK2 |
10*1500*6000 |
10 |
1500 |
6000 |
0.707 |
1 |
|
BS700MCK2 |
10*1500*6000 |
10 |
1500 |
6000 |
0.706 |
1 |
|
BS700MCK2 |
12*1500*12000 |
12 |
1500 |
12000 |
3.391 |
2 |
|
BS700MCK2 |
12*1500*12000 |
12 |
1500 |
12000 |
3.391 |
1 |
|
BS700MCK2 |
12*1500*12000 |
12 |
1500 |
12000 |
3.391 |
1 |
|
BS700MCK2 |
12*1500*13000 |
12 |
1500 |
13000 |
1.837 |
1 |
|
BS700MCK2 |
12*1500*4000 |
12 |
1500 |
4000 |
1.696 |
1 |
|
BS700MCK2 |
12*1500*4000 |
12 |
1500 |
4000 |
4.522 |
1 |
|
BS700MCK2 |
12*1500*4000 |
12 |
1500 |
4000 |
4.522 |
1 |
Product Description S620Q excessive strength steel plate also named as S620Q high strength low alloy steel plate beneath steel stand EN which is for decent rolled structural steels with excessive yield strength and tensile power in quenched and tempered delivery situation. EN metal grade specification is a high yield strength structural steels in the quenched and tempered situation steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade. Gangsteel provide EN metal grade specification is a high yield strength structural steels in the quenched and tempered condition metal plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade.
EN 10025-6 S620Q-strength grade 8 steel flanged hex head screws
EN S620Q is either available as ex–stock or directly shipped from the mill to our clients across the globe. Unitedsteel Mill Supply High strength metal plate, and have varied stock dimension, If you require excessive strength metal plate. Unitedsteel Mill Supply High strength steel plate, and have varied inventory size, when you require excessive power steel plate, please contact us by way of Email to contact us. S355J2WP metal is a hot rolled structural steel with anti-corrosion characteristic, also called weathering steel and environment corrosion resistance metal, under commonplace EN . ASTM A283 plate metal features low and intermediate tensile power carbon metal plate of structural high quality. S620Q, S620QL, S620QL1 Plates have larger payload capacity and are power environment friendly, hence can be used in leaner constructions.
EN 10025-6 S620Q strength steel hss
Ladle analysis,else the low temperature of impacting test for S620Q metal plate and sheets ought to be carried out . under minus 20 centi degree.For these three steel grades S620QL1,S620QL,S620Q shall be underneath Quenched . Amongst others, our product portfolio consists of steels with greater yield level in the tempered state in accordance with DIN EN . Colloquially, this metal can also be known as high-power constructional steel. S355 structural grade carries minimum yield power of 355 N/mm²m, the JR designation confirms that the hyperlink for you steel has undergone longitudinal Chary V-Notch impact testing at 27J at room temperature.
EN 10025-6 S620Q strength steel grades used in north america
Nb, Ti, V, Zr shall be no less than 0,015 % of a grain-refining component present. The minimum content material of 0,015 % applies to soluble aluminum, this value is thought to be attained if the total aluminum content material is no less than 0,018 %; in case of dispute the soluble aluminum content material shall be determined.
All secondary members require assessment however couldn’t require protection. values given in order to obtain the specified properties (see 7.2.2). We sell a wide variety of metals together with Hot-Rolled Steel, Cold-Rolled Steel, Stainless Steel, Alloy Steel, Galvanized Steel Pipe and Oil Tanks. Some of the names utilized in our web site are trade names and/or logos of particular producers. Supplies would be made to satisfy customer specifications from any of the out there supply. Trade names or Trademarks have been used solely for reference function and to help prospects determine products according to listed specifications. Standard EN is the Standard Specification Technical Delivery Conditions For Flat Products Of High Yield Strength Structural Steels In The Quenched And Tempered Condition.