EN 10025-6 1.8926 very high

Gangsteel supply EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate: Quenching and tempering (Q+T) S550QL is a European standard special alloy structural steel, attributed to quenched and tempered high yield strength structural steel, S indicates structural steel, 550 is the yield value, unit MPa, Q indicates delivery
Conditions, L indicates that the temperature is not lower than -50��, the specified smaller value of impact energy, S550QL steel is a trademark in the EN 10025-6 specification, this specification rules that the smaller nominal thickness of the steel is 3mm, and the larger nominal thickness ≤
150mm.

EN 10025-6 S550QL 1.8926 high strength stainless steel grades

Welded Pipe Supplied in Carbon, Low Alloy, Low Temperature, Stainless and Duplex grade steels. Seamless Pipe Supplied in Carbon, Low Alloy, Low Temperature, Stainless and Duplex grade steels. Butt Weld Fittings Incorporating Elbows, Return Bends, Tees, Caps, Reducers and Crosses.

EN 10025-6 S550QL 1.8926 gen 3 high strength steel

Plate and part processing Tata Steel International offers an intensive vary of plate and section fabricating and processing, together with can rolling, welding, shotblasting, priming, beveling, slicing, profiling and drilling. We can be happy to discuss your individual requirements in order to construct a bundle to fit your project. Section sizes Full vary of European, ASTM W-section as well as BS4 sizes are available on request. Our in-home logistics groups are consultants in consolidating supplies from multiple sources, arranging multiple packaging and ensuring that goods arrive on time, in glorious situation and at the desired destinations, wherever that’s on the planet.

EN 10025-6 S550QL 1.8926  mazda cx 30 high strength steel

Other enHaiamry noeei nntalned In laft calarei of (he FT Unit Trw InftraalKvi pages. The above shares had been underwritten by the next ffoup of worldwide underwriters. The Tata Steel Group manufactures cold-formed structural hole sections under two registered trade names Strongbox® and Hybox®.

EN 10025-6 S550QL 1.8926 high-strength metric class 10.9 steel hex head screws

s550ql

What is different in EN10025-6 S550Q S550QL and S550QL1?

S550Q, S550QL, S550QL1 are European standard quenched and tempered high-strength structural steel plates.
S550Q, S550QL, S550QL1 organize production and implement European standard EN10025-6.
S550Q, S550QL, and S550QL1 conform to EN10029 standard for appearance quality deviation.
The main difference between S500, QS550QL and S550QL1 is low temperature impact toughness: Q means -20℃ impact; QL means -40℃ impact; QL1 means -50℃.

What is EN10025-6 S550QL Carbon Equivalent: CEV?

Thickness, mm

Max CEV based on the ladle analysis

5≤t≤50

0.65%

50<t≤100

0.77%

100<t≤150

0.83%

What is EN 10025-6 QT steel plate referring standard?
EN 1011-2 Welding-Recommendations for welding of metallic materials-Part 2: Recommendations for arc welding of ferritic steels
EN 10020: 2000 definition and classification of steel grades
EN 10025-1: 2004 Hot-rolled structural steel products-Part 1: General technical delivery conditions
EN 10027-1 Steel naming system-Part 1: Steel names and symbols
EN 10027-2 Steel naming system-Part 2: Steel number
EN 10163-1 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 1: General requirements.
EN 10163-2 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 2: Plates and wide flat products
EN 10164 Steel products with through-thickness performance-Technical delivery conditions

 

EN10025-6 S550QL Mechanical Properties

Grade

Thickness

Yield Strength

Tensile Strength

Elongation

Charpy V Notch Impact Test

Degree

Min Value

S550QL

mm

Min Mpa

Mpa

Min %

-40℃

J

5≤t≤50

550

640-820

16%

30

50<t≤100

530

640-820

30

100<t≤150

490

590-770

30

Note: Impact energy for impact test is on longitudinal

EN10025-6 S550QL Chemical Composition

Grade

The Element Max (%)

C

Si

Mn

P

S

N

B

S550QL

0.22

0.86

1.80

0.025

0.012

0.016

0.006

Cr

Cu

Mo

Nb

Ni

Ti

V

1.60

0.55

0.74

0.07

2.1

0.07

0.14

As such, because of the complex nature of metal process pipe merchandise, these tables usually are not exhaustive. Tata Steel International is a provider of piling merchandise, together with both sheet and tubular piles, enabling us to offer options for a wide variety of building projects, each short-term and everlasting. Typical buildings include cofferdams, quays, wharves and harbour works, as well as land reclamation and retaining walls.

Contact Us
HENAN GANG IRON AND STEEL CO.,LTD
Email: admin@gangsteel.com
Phone: whatsapp: 0086-13598879167

Gangsteel produce EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate
, ,

The distinctive conclusions on have an effect on of the chosen welding course of information steel arc for the thought passes and metallic energetic gasoline for the filling and overlaying passes) on impression toughness of the excessive-energy low-alloyed steels are drawn. The paper furthermore presents dialogue on the valid requirements and ideas associated to welding of these steels, from the aspect of features in design of steel welded constructions.

Combining international experience with local customer service, the Tata Steel model represents quality and power. Decreased hardness in the CGHAZ of TMCP metal (240 HV0.1) was brought on by main recrystallization of the microstructure and the formation of additional equilibrium merchandise of austenite decomposition.

Increasing the warmth enter (14 to 17 kJ/cm) led to numerical t8/5 and experimental decreases in hardness contained in the CGHAZ of QT metallic (270 HV0.1) because of the complete austenite , and maintained the relative worth of TMCP steel (235 HV0.1). 09CuPCrNi-A is a climate resistant steel created by alloying copper, chromium and nickel. The numerical values point out that the maximum respective values of temperature measured in QT metal and TMCP steel had been about 1300 and 1200 °C for a heat enter of 10 kJ/cm, 1400 and 1300 °C for a heat enter of 14 kJ/cm, and 1600 and 1450 °C for a warmth enter of 17 kJ/cm. If you want to add extra copies of this product please modify the amount within EN S620Q steel plate provider the cart. For a cold fashioned gap section of the identical nominal dimension, thickness and grade as a scorching accomplished hole section, the compression capability dependent on the slenderness, may be 34% lower than for the new finished half. The statically evaluation of the final model, obtained from the optimization, was performed using the finite component method and the results was compared with the preliminary design of the model.

Based on the obtained outcomes an estimate was outfitted regarding the weldability of S 960 QL metal as well as the proposal for additional evaluation. The examine evaluates numerically and experimentally the influence of welding heat input parameters on the microstructure and hardness of the heat-affected zone of quenched and tempered and thermo-mechanically managed course of 690-MPa extreme-power steel.

Nippon Steel and ArcelorMittal plot Indian expansion blitz – Nikkei Asia

Nippon Steel and ArcelorMittal plot Indian expansion blitz.

Posted: Tue, 01 Dec 2020 02:00:00 GMT [source]

These teams regularly handle production, processing, high quality assurance, inspection, documentary requirements and customs clearance formalities. As the plate’s manufacturing is completed by making good use of optimum prime quality of alloy, it tends to supply many good properties. Those are excessive tensile vitality, toughness, weldability, excessive flexibility, sturdiness, longevity, withstanding heavy hundreds, good dimensional accuracy and fantastic ground finishes. Additionally, it’s having a higher capability to be absolutely proof towards corrosion, pitting, stress corrosion cracking, erosion, crevice corrosion, abrasion, and erosion and so forth.

The Refractory Materials Market for GCC Steel Industry Market is expected to grow by 28.96 MT during 2020-2024 progressing at a CAGR of 3% during the forecast period – PRNewswire

The Refractory Materials Market for GCC Steel Industry Market is expected to grow by 28.96 MT during 2020-2024 progressing at a CAGR of 3% during the forecast period.

Posted: Mon, 30 Nov 2020 18:30:00 GMT [source]

S690QL PLASMA CUTTING STEEL PLATE GRADE AND SPECIFICATIONEN S690QL Plasma Cutting Steel Plates Due to the supplies high vitality nature, utilizing S690QL Plasma Cutting will promote leaner designed buildings with elevated payload capability and vitality effectivity. If you have another requirement for metal plate, please be at liberty to contact us. We can supply the steel grades described as coil, slitted coil, sheets and cutted items. API 5L X65 PSL1 Pipe is a excessive yield seamless pipe that’s modified to go properly with offshore structural functions.

  • As the plate’s manufacturing is achieved by making good use of optimum prime quality of alloy, it tends to supply many good properties.
  • Additionally, it’s having a higher functionality to be completely proof towards corrosion, pitting, stress corrosion cracking, erosion, crevice corrosion, abrasion, and erosion and so forth.
  • Those are excessive tensile vitality, toughness, weldability, extreme flexibility, sturdiness, longevity, withstanding heavy lots of, good dimensional accuracy and fantastic ground finishes.
  • The distinctive conclusions on affect of the chosen welding course of information metal arc for the thought passes and metallic energetic gasoline for the filling and overlaying passes) on impression toughness of the excessive-energy low-alloyed steels are drawn.

A methodology of heat remedy for assuaging this draw back is known as tempering and requires the quenched metal to be re-heated although this time to under the lower crucial temperature. The result’s to place toughness and ductility again in to the metallic and, though numerous the yield vitality of the quenched steel is misplaced, the highest result of the quenching and tempering course of is to provide a strong metallic which can be easy to weld, bend, and fabricate typically. S355 structural grade carries minimal yield power of 355 N/mm²m, the JR designation confirms that the hyperlink for you steel has undergone longitudinal Chary V-Notch affect testing at 27J at room temperature. As the method of quenching and tempered has been improved and refined, carbon steel plates produced this fashion have turn into stronger and it’s commonplace now to seek out plates with strengths of extra that 1100 MPa which is four occasions stronger than elementary structural metal.

Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.