EN 10025-6 S550QL 1.8926 high strength steel bar
Content
Gangsteel supply EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate: Quenching and tempering (Q+T) S550QL is a European standard special alloy structural steel, attributed to quenched and tempered high yield strength structural steel, S indicates structural steel, 550 is the yield value, unit MPa, Q indicates delivery
Conditions, L indicates that the temperature is not lower than -50��, the specified smaller value of impact energy, S550QL steel is a trademark in the EN 10025-6 specification, this specification rules that the smaller nominal thickness of the steel is 3mm, and the larger nominal thickness ≤
150mm.
The proven fact that BSI and the opposite national bodies publish EN does not compel individuals to use them. (Note the continued use of the BS ‘Emergency Number’ sequence of steels years after they have been formally changed. Only when suppliers and customers absolutely settle for and understand European Standards, will it truly happen.
Sell steel gradeS690Q steel plate, S690QL steel plate, S690QL1 steel plate . S690QL is nice weld capacity, forty temperature impact test in 30J in quenched and tempered metal. We consider it too, to produce S690QL1 structural steel plates like JFE 780LE, EN S690Q, EN S690QL, and so on. that not only have excessive mechanical forte but additionally toughened plates through heat treatment that keep away from ruptures, thereby making certain security onboard. S550Q normal toughness, S550QL high toughness and S550QL1 further toughness. S550Q – according to EN with minimal impact values down to -20°C (-four°F) S550QL – in accordance with EN with minimum influence values down to -forty°C (-forty°F) S550QL1- in accordance with EN with minimum impact values down to -60°C (-76°F)EN S550QL plate, S550QL High Strength Steel, S550QL S550QL – in accordance with EN with minimal impact values all the way down to -forty°C (-forty°F) S550QL1- in accordance with EN with minimal influence values down to -60°C (-76°F) Unitedsteel Mill Supply High power metal plate, and have varied inventory measurement, should you require excessive strength steel plate, please contact us through Email to contact us. With larger mechanical vitality as by no means before, our structural metal plates, also referred to as EN S690Q, we develop metal plates with enhanced toughness and minimum influence. S690QL1 metal plate, greater typically known as SUPRALSIM 690 is an ideal worth range steel plate, providing minimal yield power of 690 MPa.
EN 10027-1 S550QL 1.8926 high strength steel plate
EN 10027-1 S550QL 1.8926 high strength steel chart
EN 10027-1 S550QL 1.8926 high strength steel sheet
EN 10027-1 S550QL 1.8926 high strength steel for sale
EN 10027-1 S550QL 1.8926 high strength low alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel sheet metal
EN 10027-1 S550QL 1.8926 high strength carbon steel plate
EN 10027-1 S550QL 1.8926 plate slenderness limits for high strength steel sections
EN 10027-1 S550QL 1.8926 what is high strength steel plate
EN 10027-1 S550QL 1.8926 a high strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plates
EN 10027-1 S550QL 1.8926 high strength stainless steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate australia
EN 10027-1 S550QL 1.8926 high strength weldable steel plate
EN 10027-1 S550QL 1.8926 ultra high strength steel plate
EN 10027-1 S550QL 1.8926 high yield strength steel plate
EN 10027-1 S550QL 1.8926 high strength alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate canada
EN 10025-6 S550QL 1.8926 high strength steel epoxy
Typically S235JR pipes underneath this specification can be used in structural applications corresponding to automobile structures, the development of buildings and bridges, and instruments and cutters in addition to for some components in shipbuilding. The EN specification refers to a set of European standards which cowl structural steels in addition to specifying their technical delivery situations as well. S550QL1 metal plate under EN10025 _ 6 belongs to excessive yield energy structural steel.With the minimum yield .strength at 550 Mpa for the thickness belows 50 millimeters,530 Mpa for the thickness between 50 and 100 .millimeters.S550QL1 should do the low temperature impacting check at minus 60 centi diploma with energy 27 JSome outcomes are removed in response to a discover of local legislation requirement.For extra data,please see here.12345NextS550QL1,S550QL1 STEEL,S550QL1 PLATEHigh yield power metal plate S550QL1 beneath EN owned the minimum yield power at 550 Mpa and tensile strength within Mpa.The needed technical requirement when rolling steel plate S550QL1 accommodates quenching and tempering warmth therapy,low temperature impacting test under minus 60 centigrade.The additional technical has Ultrasonic examination.Xinsteel roll structural Some results are removed in response to a notice of native law requirement.For extra information,please see right here. S550QL steel is a type of high yield energy quenched and Tempered structural steel material.
How Bethlehem Steel – Chrysler Building myth grew – The Morning Call
How Bethlehem Steel – Chrysler Building myth grew.
Posted: Mon, 30 Nov 2020 12:32:37 GMT [source]
At room temperature, the worth of the impression tests of the EN S235J2 Material stands at 27 joules. Steels supplied to this standard are appropriate for hardening and in the quenched and tempered situation have good toughness at a given tensile power. Gangsteel might provide EN S690Q plates immediately from our mill. Besides that, we even have inventory in hand in large thickness.
What is different in EN10025-6 S550Q S550QL and S550QL1?
S550Q, S550QL, S550QL1 are European standard quenched and tempered high-strength structural steel plates.
S550Q, S550QL, S550QL1 organize production and implement European standard EN10025-6.
S550Q, S550QL, and S550QL1 conform to EN10029 standard for appearance quality deviation.
The main difference between S500, QS550QL and S550QL1 is low temperature impact toughness: Q means -20℃ impact; QL means -40℃ impact; QL1 means -50℃.
What is EN10025-6 S550QL Carbon Equivalent: CEV?
Thickness, mm |
Max CEV based on the ladle analysis |
5≤t≤50 |
0.65% |
50<t≤100 |
0.77% |
100<t≤150 |
0.83% |
What is EN 10025-6 QT steel plate referring standard?
EN 1011-2 Welding-Recommendations for welding of metallic materials-Part 2: Recommendations for arc welding of ferritic steels
EN 10020: 2000 definition and classification of steel grades
EN 10025-1: 2004 Hot-rolled structural steel products-Part 1: General technical delivery conditions
EN 10027-1 Steel naming system-Part 1: Steel names and symbols
EN 10027-2 Steel naming system-Part 2: Steel number
EN 10163-1 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 1: General requirements.
EN 10163-2 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 2: Plates and wide flat products
EN 10164 Steel products with through-thickness performance-Technical delivery conditions
EN10025-6 S550QL Mechanical Properties |
||||||
Grade |
Thickness |
Yield Strength |
Tensile Strength |
Elongation |
Charpy V Notch Impact Test |
|
Degree |
Min Value |
|||||
S550QL |
mm |
Min Mpa |
Mpa |
Min % |
-40℃ |
J |
5≤t≤50 |
550 |
640-820 |
16% |
30 |
||
50<t≤100 |
530 |
640-820 |
30 |
|||
100<t≤150 |
490 |
590-770 |
30 |
|||
Note: Impact energy for impact test is on longitudinal |
EN10025-6 S550QL Chemical Composition |
|||||||
Grade |
The Element Max (%) |
||||||
C |
Si |
Mn |
P |
S |
N |
B |
|
S550QL |
0.22 |
0.86 |
1.80 |
0.025 |
0.012 |
0.016 |
0.006 |
Cr |
Cu |
Mo |
Nb |
Ni |
Ti |
V |
|
1.60 |
0.55 |
0.74 |
0.07 |
2.1 |
0.07 |
0.14 |
The standard applies to castings joined by weld only when the welding is finished at the foundry and not when the castings are welded to wrought steels. BS EN Stainless Steels -Part three Technical delivery conditions for semi-finished products, bars, rods and sections for common purposes. The normal situation on supply of this metal is Quenched and Tempered.
EN 10025-6 S550QL 1.8926 high strength low alloy steel plate
ASTM A283 plate steel options low and intermediate tensile energy carbon metal plate of structural high quality. We are producing S690 QL EN Quenched and tempered structural metal Plate, EN S690 QL Steel Plates, EN10025 S690QL Plate & S690QL structural metal Plates at low cost due to affordable man hours in India and good source of top quality S690QL High Yield Strength Steel Plates at best worth out there in Mumbai, India.EN S690QL High Yield Steel Plates, S690QL We are producing S690 QL EN Quenched and tempered structural metal Plate, EN S690 QL Steel Plates, EN10025 S690QL Plate & S690QL structural steel Plates at low price due to affordable man hours in India and good supply of top of the range S690QL High Yield Strength Steel Plates at finest price out there in Mumbai, India. EN S550QL1 Steel Plate are used in Construction of Bridges,Highway Construction and Other Engineering construction,Gnee steel has adequate inventory provide of EN10025 S550QL1 steel plate.If you want S550QL1 steel plate,pls feel free contact us.12345NextEN S550QL1
q245r asme equivalent material Has been dedicated to the of export metal business greater than 10 years. gb6653 hp265 fuel cylinders steel china Has been committed to the of export metal industry more than 10 years.
Low alloy and high power metal plate, heavy plate and extensive, heavy plate, Which is a big metal plate provider mill. S550QL; EN 1.8926,This Material Specification applies to quenched and tempered heavy plates manufactured from the particular structural steel N A XTRA S550QL specificationThis metal can be provided in 3 totally different grades with a minimum yield energy of 550,620 and seven hundred MPa.s550ql property,astm a519 grade 1020 provider S550QL; EN 1.8926,This Material Specification applies to quenched and tempered heavy plates made of the particular structural metal N A XTRA S550QL specificationThis steel can be provided in 3 completely different grades with a minimal yield power of 550,620 and 700 MPa.s500ql steel plate specification – Cold metal – Carbon EN steel grade specification is a excessive yield power structural steels within the quenched and tempered condition metal plate grade in S500QL,S500QL1,S460Q,S460QL,S460QL1,S620QL1,S550Q,S550QL,S550QL1,S500Q,S890QL1,S960Q,S960QL,S620Q,S620QL,S690Q,S690QL,S690QL1,S890Q and S890QL steel plate grade. EN steel grade specification is a high yield strength structural steels in the quenched and tempered situation metal plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade.
- Since non-alloy S235JR is definitely weldable and bendable, the material works out to be properly fitted to use in non-important structures.
- The machinability characteristics of the EN Steel Pipe material is comparable to that of gentle metal grades.
- The suitability of en structural steel pipe includes applications corresponding to bolted connections, welding, in addition to riveting.
- The EN specification refers to a set of European standards which cover structural steels along with specifying their technical delivery circumstances as well.
- Typically S235JR pipes under this specification can be used in structural purposes such as car buildings, the development of buildings and bridges, and instruments and cutters as well as for some components in shipbuilding.
- S550QL1 metal is a sort of high yield energy quenched and Tempered structural metal material.The supply condition for S550QL1 must be Q+T .S550QL1 steel plates also have 60 degree low temperature impact check.S550QL High strength Steel plate For EN .S275J0 Steel Grade,Mechanical Properties,Chemical.Read Moreastm 8mm a36 4mm checkered checker metal plate weight What is ABS grade A steel plate Co.are Steel provider in China,provide every kind of steel plate inventory,provide welded metal tanks for oi storage,API 650 tanks,API 620 tanksQ235B steel,A36 metal plate,A283Grade C steel,A572Grade 50,S235JR,St37-2,St52-3 metal.Xinsteel Group China Metal and Steel (#4567)steel plate s550q //s550ql US $750.00 / MT.s460ql1 excessive power steel plate US $750.00 / MT.s460q//s460ql metal plate US $750.00 / MT.a204grade b boiler steel plate US $750.00 / MT.a204 grade c boiler metal plate US $750.00 / MT.boiler steel plate A204 Grade A US $755.00 / MT.
EN 10025-6 S550QL 1.8926 high strength steel in prestressed concrete
s550ql property.For 20 years,focus on Alloy steel plate,Pipeline Steel Plate,Carbon and Low-alloy High-strength Steel,Boiler and Pressure Vessel Steel Plate,Weather Resistant Steel Plate,Shipbuilding and Offshore platform Steel plate of produce and inventory.en s620ql property – Alloy Steel Plate – Carbon EN S550QL structural steel – ciaobellasalon.biz.Supply EN S890QL1 carbon metal plate – samai.BBN Steel supply EN steel grade specification is a high yield power structural steels within the quenched and tempered condition metal plate grade in S500QL,S500QL1,S460Q,S460QL,S460QL1,S620QL1,S550Q,S550QL,S550QL1,S500Q en s550ql steel priceEN S550QL Carbon and Low-alloy High-energy Henan HZZ provides a large selection of top quality EN s550QL carbon and low-alloy high-energy metal plate with UT.Having been centered on various metal products for over 20 years,we now brings customers high quality products with high precision and high energy. Low Alloy S550 S690 High Strength Steel Plate Steel Sheet EN is Standard specifies Hot rolled merchandise of structural steels. Technical delivery conditions for flat products of high yield energy structural steels within the quenched and tempered condition.EN Standard primary steel grade S460Q, S460QL1, S460QL, S500QL, S500Q, S500QL1, S550Q, S550QL, S690Q, S690QL, S890Q, S890QL, China structural metal plates S460N producer, manufacturing facility s500ql factoryChina structural steel plates S460N producer, manufacturing facility, supplier – Steel materials EN10025 spec. S460N S460NL S420NL S420N of the low alloy and excessive energy structural metal plates Relative grades S420N S420NL S460N S460NL Other grades S460Q S460QL S460QL1 S500Q S500QL S500QL1 S550Q S550QL S550QL1 S620Q S620QL S620QL1 S890Q S890QL S890QL1 S960Q S960QL EN S500Q Steel Sheet Plate Suppliers, Buy EN EN is a Plates have good forming and welding properties.
Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.