EN 10025-6 S550QL 1.8926 strength of high tensile steel
Content
Gangsteel supply EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate: Quenching and tempering (Q+T) S550QL is a European standard special alloy structural steel, attributed to quenched and tempered high yield strength structural steel, S indicates structural steel, 550 is the yield value, unit MPa, Q indicates delivery
Conditions, L indicates that the temperature is not lower than -50��, the specified smaller value of impact energy, S550QL steel is a trademark in the EN 10025-6 specification, this specification rules that the smaller nominal thickness of the steel is 3mm, and the larger nominal thickness ≤
150mm.
Steel with minimal yield power of 690 MPa has proved extraordinarily popular with metal clients because of its availability, value, and ease of fabrication. It is ready to enhance the efficiency, sturdiness, and safety of automobiles, lifting instruments, and metal constructions. Due to the steels excessive power, constructions could also be designed lighter, payloads elevated, and energy used additional efficiently. You may even carry out ultrasonic testing in accordance with EN10160 standard, EN10164 normal take a look at Z15, Z25, Z35, weld bending detection, PWHT detection,and so on. The minimal content material of 0,015 % applies to soluble aluminum, this price is thought to be attained if the entire aluminum content material is a minimal of 0,018 %; in case of dispute the soluble aluminum content material shall be determined.
Steel output in US retreats from previous week – Recycling Today
Steel output in US retreats from previous week.
Posted: Tue, 01 Dec 2020 03:06:00 GMT [source]
We have a fantastic stock system due to which the plates are outfitted and delivered to our prospects on time. Those favorable properties are being achieved by utility of particular procedures of thermo-mechanical processing and simultaneous alloying with enough parts. S690QL STEEL PLATE GRADE AND SPECIFICATIONEN S690QL Steel Plates Due to the provides EN S690Q steel plate provider high energy nature, using S690QL will promote leaner designed buildings with elevated payload capability and energy efficiency. The Strenx 1300 High Strength Steel are the plates with extreme toughness and good welding performance. GradeThicknessMin YieldTensileElongationMin Impact EnergyS690Q8mm-50mmMin 690Mpa Mpa14%-20Min 30J51mm-100mmMin 650Mpa Mpa14%-20Min 30J101mm-150mmMin 630Mpa Mpa14%-20Min 30JFor further information in EN S690Q quenched and tempered metal plate high quality certificates or inquiry in aggressive official citation, please contact us by e mail or calling. Due to the offers extreme power nature, utilizing S690QL will promote leaner designed buildings with elevated payload capability and vitality efficiency.
EN 10025-6 S550QL 1.8926 high strength steel list
Plates of S690 metal grade adjust to EN regular.S960Q metallic plate -S355J2,S35J2G3,S355JR,S235JR Stock S960Q metal is excessive yield energy structural steels inside the quenched and tempered present state. The image S is structural steel, 690 for the minimal yield power in thickness beneath 50mm. S690q could be through the -20 temperature affect and the power is 30J.EN Grade S690QL quenched and tempered (+QT s690q propertySee the chemical composition and bodily properties of EN Grade S690QL quenched and tempered (+QT), discover different supplies EN S690Q metal plate provider, and join with suppliers.S690QL1 Structural Steel Plate, S690QL1 Plate, DILLIMAX s690q propertyS690QL1 steel plate, greater commonly known as SUPRALSIM 690 is a perfect budget metallic plate, offering minimal yield power of 690 MPa. Our S690QL1 structural metal plates are good grained, for optimum efficiency in precarious working conditions. S690QL STEEL PLATE GRADE AND SPECIFICATIONEN S690QL Steel Plates Due to the provides EN S690Q steel plate supplier extreme energy nature, utilizing S690QL will promote leaner designed buildings with increased payload capability and energy effectivity.
EN 10025-6 S550QL 1.8926 high strength steel rebar
Experimental analysis was carried out of the microstructure and microhardness habits in a number of HAZ areas. Unitedsteel Mill Supply High power metal plate, and have numerous stock size, If you require excessive power metal plate.
EN metal grade specification is a high yield vitality structural steels within the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade. EN steel grade specification is a high yield strength structural steels within the quenched and tempered condition metal plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade.
EN10025-6 S550QL 1.8926 cutting parts
Those favorable properties are being achieved by utility of specific procedures of thermo-mechanical processing and simultaneous alloying with adequate elements. The advantages that the S690QL steels have with respect to completely different steels are being introduced correct right here. However, prospects for software program of those steels in accountable welded constructions are restricted on account of their solely comparatively good weldability. EN metal grade specification is a extreme yield vitality structural steels throughout the quenched and tempered state of affairs steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade. Especially, the strengthening carry out of the reply warmth therapy and growing older treatment is fail while the millimeter scale grain have been customary in the nugget zone.
- Gangsteel provide EN steel grade specification is a excessive yield energy structural steels within the quenched and tempered situation steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade.
- EN metal grade specification is a excessive yield power structural steels throughout the quenched and tempered state of affairs steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.
- The advantages that the S690QL steels have with respect to totally different steels are being presented correct right here.
- However, prospects for software program of those steels in accountable welded constructions are restricted as a result of their solely comparatively good weldability.
- EN metallic grade specification is a excessive yield energy structural steels within the quenched and tempered state of affairs metal plate grade in S460Q, S460QL, S460QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S690Q, S690QL, S690QL1, S890Q, S890QL1 and S890QL metal plate grade.
Pressure vesselsfixed and portable storage tanks, vessels.S690Q Steel Plates Manufacturer in China, S690Q Steel The S690Q grade is austenitic in nature appropriate for heavy engineering works. It serves good resistivity towards crevice and pitting cracking subjected to impression lots.S690QL Plate, S690QL Steel Plates, S690QL Quenched and What is S690QL Steel Plate Legally licensed business Rexton steel & alloys are busy in supplying the wonderful and fascinating high quality of S690QL PLATES globally. Comparing with the metal grades S690QL and S690QL1,S690Q has an extra leisure limited on the chemical parts P and S.Maximum P% is 0.025,Maximum S% is 0.015.For different major alloy components they’re the similar restricted.S690QL plates have larger payload capability and are vitality setting pleasant, subsequently could also be utilized in leaner buildings. Our S690Ql is a structural metal grade and is produced to supply extreme yield vitality all through utilization.
What is different in EN10025-6 S550Q S550QL and S550QL1?
S550Q, S550QL, S550QL1 are European standard quenched and tempered high-strength structural steel plates.
S550Q, S550QL, S550QL1 organize production and implement European standard EN10025-6.
S550Q, S550QL, and S550QL1 conform to EN10029 standard for appearance quality deviation.
The main difference between S500, QS550QL and S550QL1 is low temperature impact toughness: Q means -20℃ impact; QL means -40℃ impact; QL1 means -50℃.
What is EN10025-6 S550QL Carbon Equivalent: CEV?
Thickness, mm |
Max CEV based on the ladle analysis |
5≤t≤50 |
0.65% |
50<t≤100 |
0.77% |
100<t≤150 |
0.83% |
What is EN 10025-6 QT steel plate referring standard?
EN 1011-2 Welding-Recommendations for welding of metallic materials-Part 2: Recommendations for arc welding of ferritic steels
EN 10020: 2000 definition and classification of steel grades
EN 10025-1: 2004 Hot-rolled structural steel products-Part 1: General technical delivery conditions
EN 10027-1 Steel naming system-Part 1: Steel names and symbols
EN 10027-2 Steel naming system-Part 2: Steel number
EN 10163-1 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 1: General requirements.
EN 10163-2 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 2: Plates and wide flat products
EN 10164 Steel products with through-thickness performance-Technical delivery conditions
EN10025-6 S550QL Mechanical Properties |
||||||
Grade |
Thickness |
Yield Strength |
Tensile Strength |
Elongation |
Charpy V Notch Impact Test |
|
Degree |
Min Value |
|||||
S550QL |
mm |
Min Mpa |
Mpa |
Min % |
-40℃ |
J |
5≤t≤50 |
550 |
640-820 |
16% |
30 |
||
50<t≤100 |
530 |
640-820 |
30 |
|||
100<t≤150 |
490 |
590-770 |
30 |
|||
Note: Impact energy for impact test is on longitudinal |
EN10025-6 S550QL Chemical Composition |
|||||||
Grade |
The Element Max (%) |
||||||
C |
Si |
Mn |
P |
S |
N |
B |
|
S550QL |
0.22 |
0.86 |
1.80 |
0.025 |
0.012 |
0.016 |
0.006 |
Cr |
Cu |
Mo |
Nb |
Ni |
Ti |
V |
|
1.60 |
0.55 |
0.74 |
0.07 |
2.1 |
0.07 |
0.14 |
S690QL plates have bigger payload functionality and are energy surroundings friendly, subsequently may be utilized in leaner buildings. Hot rolled merchandise of structural steels Technical provide conditions for flat products of excessive yield vitality structural steels in the quenched and tempered scenario of this doc, in addition to part 1, specifies necessities for flat merchandise of extreme yield vitality alloy specific steels. The grades and qualities are given in Tables 2 to four and Tables 5 to 7 and are provided within the quenched and tempered scenario as given in 6.three. Product Description S620Q excessive energy metallic plate additionally named as S620Q excessive strength low alloy metal plate beneath steel stand EN which is for heat rolled structural steels with high yield energy and tensile power in quenched and tempered delivery condition. EN steel grade specification is a excessive yield vitality structural steels inside the quenched and tempered state of affairs steel plate grade in S460Q, S460QL, S460QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S690Q, S690QL, S690QL1, S890Q, S890QL1 and S890QL metal plate grade. EN metallic grade specification is a excessive yield energy structural steels within the quenched and tempered situation steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade. Gangsteel supply EN metallic grade specification is a extreme yield power structural steels inside the quenched and tempered situation steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.
Our service entails each type of metal product , together with raw offers and processed finished merchandise. The procedure of plasticity-primarily based distortion evaluation for instantly mapping cumulative plastic strains into elastic fashions utilizing equal thermal strains was developed and utilized to the investigation of the attribute relationship between cumulative plastic strains and angular distortion in fillet welded thin EN S690Q metal plate provider-plate T-joints. If you need extra yield energy, you possibly can choose our others grade in S690Q, S890Q or S960QS460QL,St37-2 metallic equal – phare-stadsbrouwerijS460QL,As a metallic provider in China,we can provide St37-2 steel equal,boiler steel,Carbon metal,Weathering steel,Q345B steel,S355 metal,metallic equal,any steel plate inventory. ISO 630 specification for prime yield vitality structural steel plates,Fe360A,Fe360B,Fe360C,Fe360D,Fe430A,Fe430B,Fe430C,Fe430D,Fe510C,Fe510D.S620QL1,S550Q ,S550QL ,S550QL1, S500Q ,metallic plate ,EN S620QL1,S550Q ,S550QL ,S550QL1, S500Q ,metal plate ,EN . EN steel grade specification is a excessive yield energy structural steels throughout the quenched and tempered situation metal plate grade in S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade. EN metallic grade specification is a extreme yield power structural steels within the quenched and tempered situation metallic plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade. s690q metal carbon metallic, Plates of S690Q metal grade MetinvestS690Q structural highstrength metallic with minimal yield energy of 690 MPa equipped in quenched and tempered scenario .
Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.