ASTM A240 304L stainless steel plate modulus of elasticity Manufacturer

gangsteel supply astm a240 304l Stainless steel plate thickness 1mm to 300mm. the max width 2800mm. We also provide laserjet and water jet cutting for stainless grade astm a240 304l,astm a240 type 304l.a240 304l material cutting parts,a240-304 machine parts,a240 304 flat bar ,sa240 304l welded pipe.
a240 grade 304 seamless pipe,a240-304l waterjet cutting disc,a240-304 material,a240 tp304l laser cutting parts,astm a240 304l mechanical properties,astm a240 304l chemical composition,astm a240 304l properties,a240,gr 304l Origin China,sa240 tp 304l angle bar,a240 type 304l square pipe,sa240 type 304l angle steel mill,astm a240 304l stainless steel,astm a240 304l density,astm a240 304l specification.

This chrome steel plate also has an elongation of 40%, a maximum hardness of 201 on the Brinell scale and a hardness of ninety two on the Rockwell B scale. 304 and 304L ASTM A240 stainless steel plate is a normal 18-8 materials – which means it accommodates 18% chromium and eight% nickel. 304 Stainless steel plate is one of the most versatile chrome steel materials available.

ASTM A240 304L Stainless steel plates

  1. What is ASTM A240 304L Stainless steel grade?

304L stainless steel is a universal stainless-steel material.
Grade of 304L stainless steel:
The old standard JB / T 4237-1992 corresponds to 00Cr19Ni10
New standard GB / T 20878-2007 grade and chemical composition of stainless steel and heat resistant steel
And GB 24511 2009 stainless steel plate and strip for pressure equipment
Corresponding to 022cr19ni10, its carbon content is about 0.03%
The unified digital code s30403 is different from s30408 of 304

  1. What is Stainless steel ASTM a240 304l chemical composition and astm a240 304l mechanical properties

Analysis of chemical composition% of 304L stainless steel
Carbon C: ≤ 0.03,
Silicon Si: ≤ 1.0,
Mn: ≤ 2.0,
Cr: 18.0-20.0,
Ni: 9.0-12.0,
Sulfur s: ≤ 0.03,
Phosphorus P: ≤ 0.045;
mechanical property
The mechanical properties of 304L stainless steel are as follows
Yield strength (n / mm2) ≥ 205
Tensile strength ≥ 520
Elongation (%) ≥ 40
Hardness HB ≤ 187 HRB ≤ 90 HV ≤ 200
The stainless steel rods
The stainless steel rods
The density was 7.93 g · cm-3
Specific heat C (20 ℃) 0.502 J · (g · C) – 1
Thermal conductivity λ / w (m ·℃) – 1 (at the following temperature / ℃)
20 100 500
12.1 16.3 21.4
Linear expansion coefficient α / (10-6 / ℃) (between the following temperatures / ℃)
20~100 20~200 20~300 20~400
16.0 16.8 17.5 18.1
The resistivity is 0.73 Ω· mm2 · M-1
Melting point 1398 ~ 1420 ℃

Grade

ASME SA240 304 Mechanical Strength

Yield

Tensile

Elongation

Hardness, max

A240 304L

Min Mpa

Mpa

Min  %

Brinell

Rockwell B

205

515

40%

201

92

 

 

 

 

 

 

 

Plate Grade

The Element Maximum (%)

C

Mn

P

S

Si

Cr

Ni

ASTM A240 304L

0.03

2.00

0.045

0.030

0.75

18.0-20.0

8.0-10.5

Mo

N

Cu

 

 

 

 

 

0.10

 

 

 

 

 

  1. What is astm a240 304l density?

Steel Grade

Density(g/cm3)

304,304L,305,321
201,202,301,302

7.93

316,316L,347
309S,310S

7.98

405,410,420

7.75

409,430,434

7.7

What is astm a240 specification other grade?

    • 304 is a kind of universal stainless steel, which is widely used to make equipment and parts with good comprehensive performance (corrosion resistance and formability).
    • 301 stainless steel presents obvious work hardening phenomenon during deformation, which is used in various occasions requiring higher strength.
    • 302 stainless steel is essentially a variety of 304 stainless steel with higher carbon content, which can obtain higher strength by cold rolling.
    • 302B is a kind of stainless steel with high silicon content, which has high oxidation resistance at high temperature.
    • 303se and 303se are free cutting stainless steels containing sulfur and selenium respectively, which are mainly used in the occasions requiring easy cutting and high surface finish. 303se stainless steel is also used to make machine parts requiring hot upsetting because it has good hot workability under such conditions.
    • 304L is a variant of 304 stainless steel with low carbon content, which is used for welding. The lower carbon content makes the carbides precipitated in the heat affected zone near the weld to a minimum, and the precipitation of carbides may cause intergranular corrosion (welding corrosion) of stainless steel in some environments.
    • 304n is a kind of stainless-steel containing nitrogen. The purpose of adding nitrogen is to improve the strength of steel.
    • 305 and 384 stainless steels contain high nickel, and their work hardening rate is low, so they are suitable for various occasions with high requirements for cold formability.
    • 308 stainless steel is used for welding rod.
    • The contents of Ni and Cr in 309, 310, 314 and 330 stainless steels are relatively high in order to improve the oxidation resistance and creep strength of the steels at high temperature. However, 309S and 310S are variants of 309 and 310 stainless steels, but the difference is that the carbon content is low, so as to minimize the carbide precipitated near the weld. 330 stainless steel has high carburizing resistance and thermal shock resistance
    • Type 316 and 317 stainless steels contain molybdenum, so their pitting corrosion resistance in marine and chemical industry environments is much better than that of 304 stainless steel. Among them, type 316 stainless steel includes low carbon stainless steel 316L and high strength stainless steel containing nitrogen.
    • 316N and 316F, a free cutting stainless steel with high sulfur content.
    • 321, 347 and 348 are stainless steels stabilized with titanium, niobium plus tantalum and niobium respectively. They are suitable for welding at high temperature. 348 is a kind of stainless steel which is suitable for nuclear power industry.
    • The forging property of 304L stainless steel is poor and the deformation is difficult.

      Supply ASTM A240, 304L, 316LN, 316H, 316Ti, 309S, 310S stainless steel 
       
       
      1. Steel Grade: A240 TP201, TP202, TP304L, TP309S, TP310S, TP316L, TP321, TP405, TP430, TP630, 2205, 2507
       
      2. Available Size: thickness: 1-100mm, width: 500-2500mm, length: 1000-6000mm                  
       
      3. Delivery Condition: No.1, No.2D, No.2B
       
      4. Delivery Time: 3 days
       
      5. Payment Item: TT or L/C
       
      6. Trade Terms: FOB, CFR or CIF
       
      7. Inspection: MTC, TPI (ABS, BV, LR, TUV, SGS), PMI Test.
       
      If you need ASTM A240, TP304, TP316L, TP316H TP316Ti, TP309S stainless steel, please contact us freely.

    There are some key differences between 304 and 304L stainless-steel plate. 304 chrome steel plate is comprised of no more than 0.08% carbon whereas 304L stainless steel plate accommodates a maximum of 0.03% carbon. The other primary difference in chemical composition between these two stainless-steel plates grades is the quantity of nickel. 304L stainless-steel plate can have a most of 12.0% nickel while 304 stainless steel plate can only include as much as 10.5%. They each contain the identical quantity of manganese, silicon, phosphorus, sulfur, and nitrogen. Stainless Steel 317L Coils has related corrosion resistance and high power as SS 317 however can make sturdier welds due to low content of carbon. Stainless Steel 317L Sheets (DIN 1.4448) is as well generally used in petrochemical and chemical course of equipment, paper and pulp manufacturing, condensers in nuclear and fossil fueled energy era stations, and so forth.

    Stainless Food Steamer Market Outlook, Current Strategies and Growth by Top Companies:Supor, ASD, MAXCook, Cooker King – Aerospace Journal

    Stainless Food Steamer Market Outlook, Current Strategies and Growth by Top Companies:Supor, ASD, MAXCook, Cooker King.

    Posted: Tue, 03 Nov 2020 05:51:01 GMT [source]

    it also contains not more than 0.045% phosphorous, 0.03% sulfur and between 18.0% and 20% chromium. 304 stainless-steel plate is also manufactured from between eight.0% and 10.5% nickel and at most 0.10% nitrogen.

    ASTM A240 304L stainless steel plate rust Manufacturer

    Grade 430 Stainless Steel Sheets is commonly utilized in cupboard hardware, ornamental equipment and automotive molding and trim, vary hoods, restaurant equipment, drawn and shaped elements and stampings. Grade 430 Stainless Steel Coils also has wonderful resistance to citric and nitric acid, sulfur gases; slightly much less corrosion and warmth resistant than SS 301, SS 302, and SS 304. All the chrome steel grades 304, 304L, and 304H are chemically compounded with the parts like chromium, phosphorus, silicon, manganese, carbon, sulphur, molybdenum, and nickel. Besides other A240 SS304L steel plate MILL parts chromium, molybdenum, and nickel are the main contributors in the whole composition. Hence, it displays super yield in addition to tensile strengths, great temperature resistance, and elongation vary. In basic, all three grades are being elongated through the utmost restrict of 40%. Also, they’ve the best melting point at 1400 degrees Celsius apart from the 304H.

    Is carbon steel harder than 316 stainless?

    That’s stainless steel. Carbon steel, on the other hand, is stronger and harder than stainless steel. This material is used for knives and other bladed instruments that must maintain their cutting edge longer. However, this steel will oxidize when exposed to moisture, even in small amounts.

    Aluminum foil typically has a thickness of .03mm, although any sheet of steel with a thickness of less than 0.2mm is considered a foil. The mechanical properties of grade 304l Stainless Steel sheet are displayed in the following desk. Yes, it is potential to purchase dual licensed chrome steel plate in grades 304 and 304L. Yes, 304 and 304L chrome steel plate can be polished to a wide variety of finishes.

    ASTM A240 304L stainless steel plate hardness Manufacturer

    Relative keywords: 304l|304l stainless steel|aisi 304l|chemical composition of ss 304|sus 304l|composition of ss 304|ss304l|1.4307 stainless steel|304l stainless steel properties|ss 304 material properties|1.4307 material|304l steel|sa 240 gr 304|1.4306 material|304l chemical composition|ss 304l chemical composition|304l ss|304l stainless steel composition|sa 240 304l|astm a312 tp304l|yield strength 304|304l composition|uns s30403|304 stainless composition|304 stainless yield strength|ss 304 tensile strength|material 304l|1.4307 steel|s30403|aisi 304l stainless steel|sa 479 304|ss304l composition|1.4306 stainless steel|astm 304l|sa 240 type 304|ss 304 material composition|304l stainless steel price|astm a240 304l|ss304l properties|1.4307 chemical composition|sa312 tp304l|

    Type 304l and Type 304L have very comparable chemical and mechanical properties and are often included on a single materials take a look at certificates when the precise properties of a stainless steel plate meet the factors of both sorts. Type 304L is a variation of Type 304 and has a decrease carbon content which improves weldability and lowers the chance of decreased corrosion resistance around the weld. Type 304L also has a slightly lower yield and tensile power than Type 304. In ASTM A240, type 316 and 316L is a chromium nickel austenitic metal, Element molybdenum addition can enhances corrosion resistance of chrome steel, which is the main factor that 316/316l is extra corrosion resistant than 304/304l. When 316L metal of low carbon content material is just slightly higher than 316 steel on energy stage.

    Is 304 or 316 stainless steel stronger?

    What is 316 Stainless Steel and Where Is It Used? When it comes to 316 stainless steel, you can expect better corrosion and pitting resistance to chlorides than 304 stainless steel and higher levels of strength at elevated temperatures. This is due in part to the addition of molybdenum.

    ASTM 304 v A240 304L stainless steel plate Manufacturer

    Stainless Steel 304L Coils is fundamentally non-magnetic and turns right into a tad magnetic when it’s being chilly functioned. Usual industrial areas of SS 304L Coils are Chemical Industry, Food Processing, Brewing, Petrochemicals, Pharmaceuticals, and so forth. These Stainless Steel ASTM A240 & ASME SA TI Sheet are hardier to all-objective corrosion and pitting / crevice corrosion than the conformist nickel-chromium austenitic alloys like 304. Machining Grade 316Ti Sheets is as properly identical as SS 316L but has improved hovering temp efficiency and mechanical efficiency. Essentially, Machining Grade 316Ti Coils is a derived of Stainless Steel 316 Plates in the similar manner that Stainless Steel 321 is associated to Stainless Steel 304 Plates.

    Global Stainless Steel Pipes and Tubes Market Size 2020 Industry Share, Business Strategies, Growth Analysis, Regional Demand, Revenue, Key Manufacturers and Forecast 2025 – Aerospace Journal

    Global Stainless Steel Pipes and Tubes Market Size 2020 Industry Share, Business Strategies, Growth Analysis, Regional Demand, Revenue, Key Manufacturers and Forecast 2025.

    Posted: Tue, 03 Nov 2020 13:26:09 GMT [source]

    People also ask:cres 304l|a240 304l|304l yield strength|tensile strength of ss 304|ss 304l price|sa240 tp304l|1.4306 steel|ss 304 material specification|1.4307 stainless|sa213 tp304l|304l stainless steel chemical composition|aisi 304l mechanical properties|304l mechanical properties|ss 304 round bar price|304 and 304l|din 1.4307|aisi 304l chemical composition|sa 240 gr 304 material|304 round bar|ss 304l material properties|304l properties|a312 304l|304l stainless steel yield strength|aisi 304l 2b|ss304l material|304l sst|ss 1.4307|304l 2b|sa 240 gr 304l|astm s30400|304l carbon content|din 1.4306|aisi 304l properties|1.4307 aisi 304l|304l material properties|astm a312 304l|ss 304 round bar suppliers|aisi 304l composition|uns s30400 mechanical properties|sae 304l|type 304l|1.4307 stainless steel properties|sa 240 gr 304l mechanical properties|sst 304l|aisi 304l specification|1.4306 specification|astm a240 type 304l|304l austenitic stainless steel|1.4307 material properties|

    A temperature gradient is produced within the materials being welded which ranges from above the melting temperature in the molten pool to ambient temperature at some distance from the weld. The larger the carbon stage of the material being welded, the higher the chance that the welding thermal cycle will result in the chromium carbide precipitation which is detrimental to corrosion resistance. To present materials at the best level of corrosion resistance, low carbon material ought to be used for material put in service in the welded situation. Alternately, full annealing dissolves the chromium carbide and restores a excessive degree of corrosion resistance to the usual carbon content supplies.

    ASTM 304/A240 304L stainless steel plate pipe Manufacturer

    • Type 304l and Type 304L have very comparable chemical and mechanical properties and are often included on a single material test certificates when the actual properties of a stainless-steel plate meet the factors of each sorts.
    • In the same method, with the help of other alloying components present within the chrome steel grade, the SS 304 Sheet is holding many different properties too.
    • Some of the properties that are there in excessive the plates and sheets are because of the carbon alloying component current within the alloy.
    • The properties are like corrosion resistance, crevice corrosion resistance, pitting corrosion resistance.
    • Moreover, the stainless steel grade 304 and 304L is the explanation that the SS 304L Plate is nice at inheriting completely different properties.

    Amardeep metal is among the leading Manufacturer, Exporter and Supplier of High Quality ASTM A240 TP 304 Stainless Steel Plates and Sheets. We present a wide range of SS 304 Plates and Sheets in Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank , Ring . Available in several dimensions & grades, these chrome steel Chequered Plates and Sheets are extensively used in completely different industries like energy, engineering, construction and many more.

    Contact Us
    Mr Jack
    Email: jack@gangsteel.com
    Phone: 0086-13598879167

    , , CHINA

    ASTM A240 304L stainless steel plate exhaust Manufacturer

    The low carbon content makes it much less weak to intergranular corrosion cracking. The 304L Stainless Steel Strip could possibly be used for lining of structural purposes in addition to a filling material in welding. There are several types of sheets in numerous thickness such because the perforated sheets. Our SS 304L Perforated Sheet retains the power whereas lowering the weight.

    astm a240 304l,astm a240 type 304l,a240 304l material cutting parts,a240-304 machine parts,a240 304 flat bar ,sa240 304l welded pipe,a240 grade 304 seamless pipe,a240-304l waterjet cutting disc,a240-304 material,a240 tp304l laser cutting parts,astm a240 304l mechanical properties,astm a240 304l chemical composition,astm a240 304l properties,a240 gr 304l Origin China,sa240 tp 304l angle bar,a240 type 304l square pipe,sa240 type 304l angle steel mill,astm a240 304l stainless steel,astm a240 304l density,astm a240 304l specification,a240 tp 304l in 7days delivery time,astm a240 304l plate,a240 304l material stock list,astm a240 grade 304l,astm a240 gr 304l stocklist thick 5-300mm,astm a240 304l yield strength,ASTM A240 304L stainless Manufacturer,ASTM A240 304L stainless steel plate Manufacturer,