EN 10025-6 S500Q steel square steel

EN10025-6 S500Q 1.8924 carbon steel plate specification

We supply and export EN 10025-6 steel plate S500Q 1.8924. EN10025-6 S500Q and 1.8924 cutting parts which specification is a high yield strength structural steels in the quenched and tempered. The condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel grade.

S460QL1

The ensuing steel grade has high strength in addition to high toughness and on the similar time a minimum alloying content material resulting in greatest weldability. Often forming at a maximum temperature of 580°C for brief times is allowed. EN permits hot forming up, to the stress relief annealing temperature, usually within the vary • 550°C to 580°C.

TM steels obtain their properties during rolling, i.e. managed deformation at exact temperatures. However, the metal manufacturer usually has much more efficient quenching equipment than may be found elsewhere. The steels treated here have low contents of alloying elements and low carbon equivalents.

• EN steel grade specification is a excessive yield power structural steels within the quenched and tempered situation metal plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.
• China EN S620QL1 structural steel plate dealer en s620ql1 metal supplier BBN Steel provide EN metal grade specification is a high yield power structural steels within the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, en s550ql1 metal vendor – Steel case – Carbon Steel en s620ql1 metal dealerEN steel grade specification is a excessive yield power structural steels in the quenched and tempered situation steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL en s620ql1 metal dealeren s620q dealer – BDN STEELs620q steel plate distributor.
• en EN S500QL1 plate, S500QL1 High Strength Steel S500QL1- according to EN with minimum impression values down to -60°C (-seventy six°F) Unitedsteel Mill Supply High strength steel plate, and have varied stock dimension, when you require high strength metal plate, please contact us through Email to contact us.
• EN S550QL structural steel – ciaobellasalon.biz.Supply EN S890QL1 carbon steel plate – samai.BBN Steel provide EN metal grade specification is a high yield power structural steels in the quenched and tempered situation steel plate grade in S500QL,S500QL1,S460Q,S460QL,S460QL1,S620QL1,S550Q,S550QL,S550QL1,S500Q .

EN S550QL S550 QL STEEL PLATE__Steel Supplier.EN S550QL S550 QL STEEL PLATE BBNSTEEL Grade EN S550QL Specification THK3 to 300,Width1500 to 4050,Length3000 to StandardTechnical supply situations for flat products ofen s960ql hr plate – Carbon steels – Steel Plate EN S460QL excessive energy structural metal plates .EN S460QL high power structural steel plates are usually delivered in the state of warmth therapy as normalizing,annealing or excessive temperature tempering,or non heat therapy state,the supply state of S460QL metal plates must be famous within the mill test certificate.en s960ql hr plate – Carbon steels – Steel Plate EN S460QL excessive power structural steel plates .EN S460QL high energy structural steel plates are normally delivered in the state of heat remedy as normalizing,annealing or excessive temperature tempering,or non warmth therapy state,the supply state of S460QL steel plates must be noted within the mill test certificate. DIN EN S460QL1 Non- Alloy Structural Steel Plate BBNSTEEL Steel can provide DIN EN S460QL1 Structural Carbon Steel Plate,primarily used in development in the fields requiring carbon metal plates with kinds of impression exams and power. With practically 20 years’ experience, Henan HZZ is now often known as one of the main producers and suppliers of en s500q carbon and low-alloy high-strength steel plate with ut. Please relaxation assured to purchase high quality metal products with high strength from our manufacturing facility. The maximum alloying contents for prime power steels as given in the standards are often thought-about to offer very conservative upper limits.

EN 10025-6 S500Q steel plate

1. There is no code for the first level: S500Q: P: ≤0.025, S: ≤0.015;
2. The L-level code L is expressed as S500QL: P: ≤0.020, S: ≤0.010;
3. The L1 code L1 is expressed as S500QL1: P: ≤0.020, S: ≤0.010
4. The other ingredients are the same, as shown below:
C:≤0.20, Si:s0.80, Mn:s1.70, N:≤0.015, B:≤0.0050, Cr:s1 .50, Cu:0.50, Mo:0.70,
Nb: 0.06, Ni: s2.0, Ti: s0.05, V: ≤0.12, Zr: ≤0.15
3. Application and prospect of S500Q S500QL/S500QL1
S500Q applies construction machinery, mining machinery, coal mine machinery such as hydraulic supports, crane extension arms, crane extension arms,
Excavator support arm, etc.
Mainly used in the manufacture of hydraulic supports with high welding performance, heavy vehicles, construction machinery, and port machinery.
4. S500Q series steel plate low-alloy high-strength structural steel:
5, S500Q series steel plate series performance specifications: this trademark fulfills the EN 10025/6-2004 European standard specifications.
6. Packaging, marking and quality certificate of S500Q series steel plate: The packaging, marking and quality certificate of steel plate shall comply with the rules of GB/T 247

They could be easily welded to all ordinary structural steels using any standard arc welding technique. This is especially true for the TM steels since an S460M metal has a lower carbon equivalent than an odd structural steel. The TM steels have a wider window for heat enter and preheating than QT steels. Even for thicker plates of S460M preheating can be omitted and thus welding prices lowered. In November 2004 the new normal for hot-rolled steel merchandise for utilization in steel development EN was revealed. This commonplace has six components and defines the commonest structural steel grades which have been formerly handled in the unbiased requirements EN and EN 10137.

This agrees with the suggestions of the steel manufacturers. In follow scorching forming is rarely used due to the good cold formability of these steels. However, also in this respect the steels typically have far better properties than specified within the requirements. For TM steels EN has choices concerning flangeability for material with a nominal thickness t 5 12 mm and roll forming for materials with t 5. For the metal grades S420 and S460 the minimal bend radius is 4 instances t with the axis of the bend in the transverse direction and 5 times t in the longitudinal direction.

What is EN 10025-6 S500Q chemical?
EN10025-6 S500Q quenched and tempered steel plate Chemical composition

What is EN 10025-6 S500Q Equal Grade.
S500Q and S500QL steel plates are German standard high-strength structural steels, usually called high-strength plates, equivalent to the national standard Q500D,
It is widely used in construction machinery and mining machinery.
S500QL steel standard: EN 10025/6-2004 delivery status: quenched and tempered. S500Q series are: S500Q, S500QL, S500QL1.Second, S500Q chemical composition: The quality of S500Q is divided into three levels

What is application of EN10025-6 S500Q?
Used in buildings, bridges, ships, vehicles, pressure vessels and other structures, the carbon content (melting analysis) is generally not more than 0.20%, the total content of alloying elements is generally not more than 2.5%, the yield strength is not less than 295MPa, and it has good impact toughness
And low alloy steel with welding function.

What is EN 10025-6 S500Q mechanical properties?
EN10025-6 S500Q quenched and tempered steel plate mechanical properties

China EN S620QL1 structural metal plate supplier en s620ql1 metal vendor BBN Steel supply EN metal grade specification is a high yield energy structural steels within the quenched and tempered situation steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, en s550ql1 metal vendor – Steel case – Carbon Steel en s620ql1 metal dealerEN metal grade specification is a excessive yield strength structural steels in the quenched and tempered condition metal plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL en s620ql1 steel dealeren s620q supplier – BDN STEELs620q steel plate distributor. EN steel grade specification is a excessive yield strength structural steels in the quenched and tempered situation metal plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.

WARFRAME Wiki

Description by Manufacturer
Sell: EN10025-6 S500Q, S500QL, S500QL1 Steel plate
1. Steel Grade :EN10025-6 S500Q, S500QL, S500QL1 S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.
2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm
3. Adopt Standard: EN 10025-6.
4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate
6. Payment Item: 30% TT, or LC and TT
7. Trade Terms: FOB, CFR, CIF
8. Delivery Time: 30-40days